The WEBCARDLXE is designed to fit specific Eaton Tripp Lite Series SmartPro and SmartOnline UPS systems only. Please verify its compatibility with your model before ordering. It is also backward-compatible with PDUs and UPS systems that currently support the WEBCARDLX management card.
Features | Allows Any Compatible UPS System to Function as a Managed Network Device
WEBCARDLXE turns a compatible UPS system into a managed device on your network. By inserting the network management card into an accessory slot and using an SNMP network management platform, web browser, SSH or Telnet, you can access, monitor, control and reboot the managed device from almost anywhere at any time. WEBCARDLXE's HTML5-based interface means Java isn't needed to interact with the mobile-friendly PowerAlert® Device Manager.
Remotely Monitor and Reboot Network Equipment from Anywhere 24/7
You can remotely monitor and log site electrical data, UPS self-tests, alerts and power events like blackouts, brownouts and overvoltage conditions. You can also reboot locked network equipment without an on-site visit or disruption of power to other loads (when used with controllable outlets or remotely switchable outlets on select devices).
Control Access and Stay Informed with Event Notifications
You can assign users different levels of access from full administrator to view-only operator. Multiple user support allows viewing by more than one user simultaneously. In addition, you can create an encrypted connection using your web browser's SSL setting. Based on your preferences, the WEBCARDLXE can notify you of events and power conditions with email messages or SNMP traps. It can also automatically shut down remote operating systems over your network. Real-time clock support maintains current day and date, even after a UPS shutdown.
Check Environmental Data with an Optional EnviroSense2
When connected to EnviroSense2 modules (sold separately), the WEBCARDLXE can control digital outputs and monitor temperature, humidity and contact closure state (features vary by module). Up to three EnviroSense2 modules may be daisy-chained together and mounted magnetically to your rack.
Save Time with Mass Configurations
PowerAlert Element Manager (PAEM) software consolidates different management utilities and simplifies the software-based maintenance of WEBCARDLXE. Its discovery engine identifies supported network solutions to concurrently apply a source configuration to multiple target devices, as well as update firmware on multiple devices.
Allows full remote access and management via SNMP, web, SSH or Telnet
Reboots unresponsive equipment remotely without requiring a costly site visit
Sends user-configurable alerts via SNMP or email
Optional EnviroSense2 sensors enable site monitoring of environmental status
Mobile-friendly HTML5-based interface requires no Java for interaction
https://www.trivoshop.com/tripp-lite-network-card-for-select-tripp-lite-and-eaton-ups-systems-and-pdus-etdwebcardlxe610796Tripp Lite Network Card for Select Tripp Lite and Eaton UPS Systems and PDUshttps://www.trivoshop.com/media/catalog/product/1/5/156181719.jpg364.27364.27USDInStock/Power Accessories/Power Accessories/Remote Management Adapters55322<p>The WEBCARDLXE is designed to fit specific Eaton Tripp Lite Series SmartPro and SmartOnline UPS systems only. Please verify its compatibility with your model before ordering. It is also backward-compatible with PDUs and UPS systems that currently support the WEBCARDLX management card.<br /><br /><b>Features | Allows Any Compatible UPS System to Function as a Managed Network Device<br /></b><br />WEBCARDLXE turns a compatible UPS system into a managed device on your network. By inserting the network management card into an accessory slot and using an SNMP network management platform, web browser, SSH or Telnet, you can access, monitor, control and reboot the managed device from almost anywhere at any time. WEBCARDLXE's HTML5-based interface means Java isn't needed to interact with the mobile-friendly PowerAlert® Device Manager.</p> <p><b>Remotely Monitor and Reboot Network Equipment from Anywhere 24/7</b></p> <p>You can remotely monitor and log site electrical data, UPS self-tests, alerts and power events like blackouts, brownouts and overvoltage conditions. You can also reboot locked network equipment without an on-site visit or disruption of power to other loads (when used with controllable outlets or remotely switchable outlets on select devices).</p> <p><b>Control Access and Stay Informed with Event Notifications</b></p> <p>You can assign users different levels of access from full administrator to view-only operator. Multiple user support allows viewing by more than one user simultaneously. In addition, you can create an encrypted connection using your web browser's SSL setting. Based on your preferences, the WEBCARDLXE can notify you of events and power conditions with email messages or SNMP traps. It can also automatically shut down remote operating systems over your network. Real-time clock support maintains current day and date, even after a UPS shutdown.</p> <p><b>Check Environmental Data with an Optional EnviroSense2<br /></b></p> <p>When connected to EnviroSense2 modules (sold separately), the WEBCARDLXE can control digital outputs and monitor temperature, humidity and contact closure state (features vary by module). Up to three EnviroSense2 modules may be daisy-chained together and mounted magnetically to your rack.</p> <p><b>Save Time with Mass Configurations <br /></b><br />PowerAlert Element Manager (PAEM) software consolidates different management utilities and simplifies the software-based maintenance of WEBCARDLXE. Its discovery engine identifies supported network solutions to concurrently apply a source configuration to multiple target devices, as well as update firmware on multiple devices.</p><br><ul><li>Allows full remote access and management via SNMP, web, SSH or Telnet</li><li>Reboots unresponsive equipment remotely without requiring a costly site visit</li><li>Sends user-configurable alerts via SNMP or email</li><li>Optional EnviroSense2 sensors enable site monitoring of environmental status</li><li>Mobile-friendly HTML5-based interface requires no Java for interaction</li><li>2-year limited warranty</li></ul>Tripp Lite by Eaton00add-to-cartsku:ETDWEBCARDLXEdescription:<p>The WEBCARDLXE is designed to fit specific Eaton Tripp Lite Series SmartPro and SmartOnline UPS systems only. Please verify its compatibility with your model before ordering. It is also backward-compatible with PDUs and UPS systems that currently support the WEBCARDLX management card.<br /><br /><b>Features | Allows Any Compatible UPS System to Function as a Managed Network Device<br /></b><br />WEBCARDLXE turns a compatible UPS system into a managed device on your network. By inserting the network management card into an accessory slot and using an SNMP network management platform, web browser, SSH or Telnet, you can access, monitor, control and reboot the managed device from almost anywhere at any time. WEBCARDLXE's HTML5-based interface means Java isn't needed to interact with the mobile-friendly PowerAlert® Device Manager.</p> <p><b>Remotely Monitor and Reboot Network Equipment from Anywhere 24/7</b></p> <p>You can remotely monitor and log site electrical data, UPS self-tests, alerts and power events like blackouts, brownouts and overvoltage conditions. You can also reboot locked network equipment without an on-site visit or disruption of power to other loads (when used with controllable outlets or remotely switchable outlets on select devices).</p> <p><b>Control Access and Stay Informed with Event Notifications</b></p> <p>You can assign users different levels of access from full administrator to view-only operator. Multiple user support allows viewing by more than one user simultaneously. In addition, you can create an encrypted connection using your web browser's SSL setting. Based on your preferences, the WEBCARDLXE can notify you of events and power conditions with email messages or SNMP traps. It can also automatically shut down remote operating systems over your network. Real-time clock support maintains current day and date, even after a UPS shutdown.</p> <p><b>Check Environmental Data with an Optional EnviroSense2<br /></b></p> <p>When connected to EnviroSense2 modules (sold separately), the WEBCARDLXE can control digital outputs and monitor temperature, humidity and contact closure state (features vary by module). Up to three EnviroSense2 modules may be daisy-chained together and mounted magnetically to your rack.</p> <p><b>Save Time with Mass Configurations <br /></b><br />PowerAlert Element Manager (PAEM) software consolidates different management utilities and simplifies the software-based maintenance of WEBCARDLXE. Its discovery engine identifies supported network solutions to concurrently apply a source configuration to multiple target devices, as well as update firmware on multiple devices.</p><br><ul><li>Allows full remote access and management via SNMP, web, SSH or Telnet</li><li>Reboots unresponsive equipment remotely without requiring a costly site visit</li><li>Sends user-configurable alerts via SNMP or email</li><li>Optional EnviroSense2 sensors enable site monitoring of environmental status</li><li>Mobile-friendly HTML5-based interface requires no Java for interaction</li><li>2-year limited warranty</li></ul>price:364.270000weight:1.000000manufacturer:Tripp Lite by Eatonimage:/1/5/156181719.jpgsmall_image:/1/5/156181719.jpgthumbnail:/1/5/156181719.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2024-03-22 09:00:13updated_at:2024-03-22 09:00:13country_of_manufacture: custom_layout:No layout updatesmsrp:376.950000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/1/5/156181719.jpgtax_class_id:Taxable Goodsproduct_name:Series WEBCARDLXE Network Management Cardcompatibility:SmartPro, SmartOnlineproduct_type:UPS/PDU Remote Management Adaptermanufacturer_part_number:WEBCARDLXEcountry_of_origin:Taiwanlimited_warranty:2 Yearbrand_name:Tripp Liteproduct_model:WEBCARDLXEpackage_contents:Series WEBCARDLXE Network Management Card, Configuration Cable (73-1689), Faceplates, Owner's Manualenvironmental_certification:RoHS 3,REACHenvironmentally_friendly:Yestaa_compliant:Yeswesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nosku:ETDWEBCARDLXEdescription:<p>The WEBCARDLXE is designed to fit specific Eaton Tripp Lite Series SmartPro and SmartOnline UPS systems only. Please verify its compatibility with your model before ordering. It is also backward-compatible with PDUs and UPS systems that currently support the WEBCARDLX management card.<br /><br /><b>Features | Allows Any Compatible UPS System to Function as a Managed Network Device<br /></b><br />WEBCARDLXE turns a compatible UPS system into a managed device on your network. By inserting the network management card into an accessory slot and using an SNMP network management platform, web browser, SSH or Telnet, you can access, monitor, control and reboot the managed device from almost anywhere at any time. WEBCARDLXE's HTML5-based interface means Java isn't needed to interact with the mobile-friendly PowerAlert® Device Manager.</p> <p><b>Remotely Monitor and Reboot Network Equipment from Anywhere 24/7</b></p> <p>You can remotely monitor and log site electrical data, UPS self-tests, alerts and power events like blackouts, brownouts and overvoltage conditions. You can also reboot locked network equipment without an on-site visit or disruption of power to other loads (when used with controllable outlets or remotely switchable outlets on select devices).</p> <p><b>Control Access and Stay Informed with Event Notifications</b></p> <p>You can assign users different levels of access from full administrator to view-only operator. Multiple user support allows viewing by more than one user simultaneously. In addition, you can create an encrypted connection using your web browser's SSL setting. Based on your preferences, the WEBCARDLXE can notify you of events and power conditions with email messages or SNMP traps. It can also automatically shut down remote operating systems over your network. Real-time clock support maintains current day and date, even after a UPS shutdown.</p> <p><b>Check Environmental Data with an Optional EnviroSense2<br /></b></p> <p>When connected to EnviroSense2 modules (sold separately), the WEBCARDLXE can control digital outputs and monitor temperature, humidity and contact closure state (features vary by module). Up to three EnviroSense2 modules may be daisy-chained together and mounted magnetically to your rack.</p> <p><b>Save Time with Mass Configurations <br /></b><br />PowerAlert Element Manager (PAEM) software consolidates different management utilities and simplifies the software-based maintenance of WEBCARDLXE. Its discovery engine identifies supported network solutions to concurrently apply a source configuration to multiple target devices, as well as update firmware on multiple devices.</p><br><ul><li>Allows full remote access and management via SNMP, web, SSH or Telnet</li><li>Reboots unresponsive equipment remotely without requiring a costly site visit</li><li>Sends user-configurable alerts via SNMP or email</li><li>Optional EnviroSense2 sensors enable site monitoring of environmental status</li><li>Mobile-friendly HTML5-based interface requires no Java for interaction</li><li>2-year limited warranty</li></ul>price:364.270000weight:1.000000manufacturer:Tripp Lite by Eatonimage:/1/5/156181719.jpgsmall_image:/1/5/156181719.jpgthumbnail:/1/5/156181719.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2024-03-22 09:00:13updated_at:2024-03-22 09:00:13country_of_manufacture: custom_layout:No layout updatesmsrp:376.950000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/1/5/156181719.jpgtax_class_id:Taxable Goodsproduct_name:Series WEBCARDLXE Network Management Cardcompatibility:SmartPro, SmartOnlineproduct_type:UPS/PDU Remote Management Adaptermanufacturer_part_number:WEBCARDLXEcountry_of_origin:Taiwanlimited_warranty:2 Yearbrand_name:Tripp Liteproduct_model:WEBCARDLXEpackage_contents:Series WEBCARDLXE Network Management Card, Configuration Cable (73-1689), Faceplates, Owner's Manualenvironmental_certification:RoHS 3,REACHenvironmentally_friendly:Yestaa_compliant:Yeswesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nosku:ETDWEBCARDLXEdescription:<p>The WEBCARDLXE is designed to fit specific Eaton Tripp Lite Series SmartPro and SmartOnline UPS systems only. Please verify its compatibility with your model before ordering. It is also backward-compatible with PDUs and UPS systems that currently support the WEBCARDLX management card.<br /><br /><b>Features | Allows Any Compatible UPS System to Function as a Managed Network Device<br /></b><br />WEBCARDLXE turns a compatible UPS system into a managed device on your network. By inserting the network management card into an accessory slot and using an SNMP network management platform, web browser, SSH or Telnet, you can access, monitor, control and reboot the managed device from almost anywhere at any time. WEBCARDLXE's HTML5-based interface means Java isn't needed to interact with the mobile-friendly PowerAlert® Device Manager.</p> <p><b>Remotely Monitor and Reboot Network Equipment from Anywhere 24/7</b></p> <p>You can remotely monitor and log site electrical data, UPS self-tests, alerts and power events like blackouts, brownouts and overvoltage conditions. You can also reboot locked network equipment without an on-site visit or disruption of power to other loads (when used with controllable outlets or remotely switchable outlets on select devices).</p> <p><b>Control Access and Stay Informed with Event Notifications</b></p> <p>You can assign users different levels of access from full administrator to view-only operator. Multiple user support allows viewing by more than one user simultaneously. In addition, you can create an encrypted connection using your web browser's SSL setting. Based on your preferences, the WEBCARDLXE can notify you of events and power conditions with email messages or SNMP traps. It can also automatically shut down remote operating systems over your network. Real-time clock support maintains current day and date, even after a UPS shutdown.</p> <p><b>Check Environmental Data with an Optional EnviroSense2<br /></b></p> <p>When connected to EnviroSense2 modules (sold separately), the WEBCARDLXE can control digital outputs and monitor temperature, humidity and contact closure state (features vary by module). Up to three EnviroSense2 modules may be daisy-chained together and mounted magnetically to your rack.</p> <p><b>Save Time with Mass Configurations <br /></b><br />PowerAlert Element Manager (PAEM) software consolidates different management utilities and simplifies the software-based maintenance of WEBCARDLXE. Its discovery engine identifies supported network solutions to concurrently apply a source configuration to multiple target devices, as well as update firmware on multiple devices.</p><br><ul><li>Allows full remote access and management via SNMP, web, SSH or Telnet</li><li>Reboots unresponsive equipment remotely without requiring a costly site visit</li><li>Sends user-configurable alerts via SNMP or email</li><li>Optional EnviroSense2 sensors enable site monitoring of environmental status</li><li>Mobile-friendly HTML5-based interface requires no Java for interaction</li><li>2-year limited warranty</li></ul>price:364.270000weight:1.000000manufacturer:Tripp Lite by Eatonimage:/1/5/156181719.jpgsmall_image:/1/5/156181719.jpgthumbnail:/1/5/156181719.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2024-03-22 09:00:13updated_at:2024-03-22 09:00:13country_of_manufacture: custom_layout:No layout updatesmsrp:376.950000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/1/5/156181719.jpgtax_class_id:Taxable Goodsproduct_name:Series WEBCARDLXE Network Management Cardcompatibility:SmartPro, SmartOnlineproduct_type:UPS/PDU Remote Management Adaptermanufacturer_part_number:WEBCARDLXEcountry_of_origin:Taiwanlimited_warranty:2 Yearbrand_name:Tripp Liteproduct_model:WEBCARDLXEpackage_contents:Series WEBCARDLXE Network Management Card, Configuration Cable (73-1689), Faceplates, Owner's Manualenvironmental_certification:RoHS 3,REACHenvironmentally_friendly:Yestaa_compliant:Yeswesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:NoTripp LiteSmartPro, SmartOnlineTaiwan2024-03-22 09:00:13-- Please Select --No layout updates<p>The WEBCARDLXE is designed to fit specific Eaton Tripp Lite Series SmartPro and SmartOnline UPS systems only. Please verify its compatibility with your model before ordering. It is also backward-compatible with PDUs and UPS systems that currently support the WEBCARDLX management card.<br /><br /><b>Features | Allows Any Compatible UPS System to Function as a Managed Network Device<br /></b><br />WEBCARDLXE turns a compatible UPS system into a managed device on your network. By inserting the network management card into an accessory slot and using an SNMP network management platform, web browser, SSH or Telnet, you can access, monitor, control and reboot the managed device from almost anywhere at any time. WEBCARDLXE's HTML5-based interface means Java isn't needed to interact with the mobile-friendly PowerAlert® Device Manager.</p> <p><b>Remotely Monitor and Reboot Network Equipment from Anywhere 24/7</b></p> <p>You can remotely monitor and log site electrical data, UPS self-tests, alerts and power events like blackouts, brownouts and overvoltage conditions. You can also reboot locked network equipment without an on-site visit or disruption of power to other loads (when used with controllable outlets or remotely switchable outlets on select devices).</p> <p><b>Control Access and Stay Informed with Event Notifications</b></p> <p>You can assign users different levels of access from full administrator to view-only operator. Multiple user support allows viewing by more than one user simultaneously. In addition, you can create an encrypted connection using your web browser's SSL setting. Based on your preferences, the WEBCARDLXE can notify you of events and power conditions with email messages or SNMP traps. It can also automatically shut down remote operating systems over your network. Real-time clock support maintains current day and date, even after a UPS shutdown.</p> <p><b>Check Environmental Data with an Optional EnviroSense2<br /></b></p> <p>When connected to EnviroSense2 modules (sold separately), the WEBCARDLXE can control digital outputs and monitor temperature, humidity and contact closure state (features vary by module). Up to three EnviroSense2 modules may be daisy-chained together and mounted magnetically to your rack.</p> <p><b>Save Time with Mass Configurations <br /></b><br />PowerAlert Element Manager (PAEM) software consolidates different management utilities and simplifies the software-based maintenance of WEBCARDLXE. Its discovery engine identifies supported network solutions to concurrently apply a source configuration to multiple target devices, as well as update firmware on multiple devices.</p><br><ul><li>Allows full remote access and management via SNMP, web, SSH or Telnet</li><li>Reboots unresponsive equipment remotely without requiring a costly site visit</li><li>Sends user-configurable alerts via SNMP or email</li><li>Optional EnviroSense2 sensors enable site monitoring of environmental status</li><li>Mobile-friendly HTML5-based interface requires no Java for interaction</li><li>2-year limited warranty</li></ul>YesRoHS 3,REACHYesNoNo/1/5/156181719.jpgYesYes2 YearTripp Lite by EatonWEBCARDLXE376.950000Use configBlock after Info ColumnSeries WEBCARDLXE Network Management Card, Configuration Cable (73-1689), Faceplates, Owner's ManualNo layout updates364.270000Price RangeWEBCARDLXESeries WEBCARDLXE Network Management CardUPS/PDU Remote Management AdapterTogetherETDWEBCARDLXE/1/5/156181719.jpgEnabledNo/1/5/156181719.jpgNoYesTaxable Goods/1/5/156181719.jpg2024-03-22 09:00:13YesCatalog, Search1.000000Yes
