J-Hooks: An Inexpensive Alternative to Cable Trays
These two-inch batwing J-hooks are recommended for setting up network or digital signage installations that require cabling to be run above drop ceilings, below raised floors or through inner duct systems for long distances. Tripp Lite's NCM-JHC20-25 comes with 25 swiveling batwing J-hooks that attach to a threaded rod or ceiling wire.
Designed to Accommodate a Wide Assortment of Cable Types
Less expensive and more flexible than cable trays or ladder rack runways, these J-hooks accommodate Cat5e/6/6a, fiber optic, audio/video, coaxial and other cable types. They comply with TIA-56B-C, TIA-569-C and ISO/IEC 14763-2 requirements for structured cabling systems, making them a perfect accessory for contractors, IT staff and cable installers.
Made from Galvanized Steel to Provide Proper Long-Term Support
These easy-to-install J-hooks are made from 18-gauge galvanized steel with a zinc-plated finish. To give you an idea of their strength, they offer stress-free support for up to 90 Cat5e cables, 60 Cat6 cables or 35 Cat6a cables. Maximum weight capacity is 60 pounds. Built-in anchor points allow you to use cable ties (sold separately) to secure cabling in place. Typical Applications
Neatly bundle cable above a drop ceiling or below a raised floor in your data center, network installation or digital signage setup
Recommended for network and digital signage cabling above ceilings or below floors
Made from galvanized steel designed to hold long lengths of cabling up to 60 lb.
Offers stress-free support for wide range of cables, including fiber, A/V and Cat5e/6
Built-in anchor points allow use of cable ties to hold cables in place
Package includes 25 batwing J-hooks that comply with TIA/EIA requirements
https://www.trivoshop.com/tripp-lite-j-hook-cable-support-2-batwing-galvanized-steel-25-pack-eim6lp469919401Tripp Lite J-Hook Cable Support - 2" , Batwing, Galvanized Steel, 25 Packhttps://www.trivoshop.com/media/catalog/product/1/5/158505221.jpg78.0678.06USDInStock/Rack & Cabling/Rack & Cabling/Cable Management/Top Categories/Computers, Laptops & Accessories1112047716<p><b>J-Hooks: An Inexpensive Alternative to Cable Trays</b></p> <p>These two-inch batwing J-hooks are recommended for setting up network or digital signage installations that require cabling to be run above drop ceilings, below raised floors or through inner duct systems for long distances. Tripp Lite's NCM-JHC20-25 comes with 25 swiveling batwing J-hooks that attach to a threaded rod or ceiling wire.</p> <p><b>Designed to Accommodate a Wide Assortment of Cable Types<br /></b></p> <p>Less expensive and more flexible than cable trays or ladder rack runways, these J-hooks accommodate Cat5e/6/6a, fiber optic, audio/video, coaxial and other cable types. They comply with TIA-56B-C, TIA-569-C and ISO/IEC 14763-2 requirements for structured cabling systems, making them a perfect accessory for contractors, IT staff and cable installers.<br /><br /></p> <p><b>Made from Galvanized Steel to Provide Proper Long-Term Support</b></p> <p>These easy-to-install J-hooks are made from 18-gauge galvanized steel with a zinc-plated finish. To give you an idea of their strength, they offer stress-free support for up to 90 Cat5e cables, 60 Cat6 cables or 35 Cat6a cables. Maximum weight capacity is 60 pounds. Built-in anchor points allow you to use cable ties (sold separately) to secure cabling in place.<br /><b><br />Typical Applications</b></p> <ul> <li>Neatly bundle cable above a drop ceiling or below a raised floor in your data center, network installation or digital signage setup</li> </ul> <p><b> </b></p><br><ul><li>Recommended for network and digital signage cabling above ceilings or below floors</li><li>Made from galvanized steel designed to hold long lengths of cabling up to 60 lb.</li><li>Offers stress-free support for wide range of cables, including fiber, A/V and Cat5e/6</li><li>Built-in anchor points allow use of cable ties to hold cables in place</li><li>Package includes 25 batwing J-hooks that comply with TIA/EIA requirements</li></ul>Tripp Lite by Eaton00add-to-cartsku:EIM6LP469description:<p><b>J-Hooks: An Inexpensive Alternative to Cable Trays</b></p> <p>These two-inch batwing J-hooks are recommended for setting up network or digital signage installations that require cabling to be run above drop ceilings, below raised floors or through inner duct systems for long distances. Tripp Lite's NCM-JHC20-25 comes with 25 swiveling batwing J-hooks that attach to a threaded rod or ceiling wire.</p> <p><b>Designed to Accommodate a Wide Assortment of Cable Types<br /></b></p> <p>Less expensive and more flexible than cable trays or ladder rack runways, these J-hooks accommodate Cat5e/6/6a, fiber optic, audio/video, coaxial and other cable types. They comply with TIA-56B-C, TIA-569-C and ISO/IEC 14763-2 requirements for structured cabling systems, making them a perfect accessory for contractors, IT staff and cable installers.<br /><br /></p> <p><b>Made from Galvanized Steel to Provide Proper Long-Term Support</b></p> <p>These easy-to-install J-hooks are made from 18-gauge galvanized steel with a zinc-plated finish. To give you an idea of their strength, they offer stress-free support for up to 90 Cat5e cables, 60 Cat6 cables or 35 Cat6a cables. Maximum weight capacity is 60 pounds. Built-in anchor points allow you to use cable ties (sold separately) to secure cabling in place.<br /><b><br />Typical Applications</b></p> <ul> <li>Neatly bundle cable above a drop ceiling or below a raised floor in your data center, network installation or digital signage setup</li> </ul> <p><b> </b></p><br><ul><li>Recommended for network and digital signage cabling above ceilings or below floors</li><li>Made from galvanized steel designed to hold long lengths of cabling up to 60 lb.</li><li>Offers stress-free support for wide range of cables, including fiber, A/V and Cat5e/6</li><li>Built-in anchor points allow use of cable ties to hold cables in place</li><li>Package includes 25 batwing J-hooks that comply with TIA/EIA requirements</li></ul>price:78.060000weight:5.600000manufacturer:Tripp Lite by Eatonimage:/1/5/158505221.jpgsmall_image:/1/5/158505221.jpgthumbnail:/1/5/158505221.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2024-04-14 03:10:22updated_at:2024-04-14 03:10:22country_of_manufacture: custom_layout:No layout updatesmsrp:134.400000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/1/5/158505221.jpgtax_class_id:Taxable Goodsproduct_name:J-Hook Cable Support - 2", Batwing, Galvanized Steel, 25 Packwidth:1.38"product_type:Cable Tyingheight:4.77"manufacturer_part_number:NCM-JHC20-25country_of_origin:Chinabrand_name:Tripp Liteproduct_model:NCM-JHC20-25weight_approximate:2.82 ozdepth:2"product_material:Galvanized Steelenvironmental_certification:RoHS,REACHenvironmentally_friendly:Yesproduct_color:Silverpackaged_quantity:25wesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nosku:EIM6LP469description:<p><b>J-Hooks: An Inexpensive Alternative to Cable Trays</b></p> <p>These two-inch batwing J-hooks are recommended for setting up network or digital signage installations that require cabling to be run above drop ceilings, below raised floors or through inner duct systems for long distances. Tripp Lite's NCM-JHC20-25 comes with 25 swiveling batwing J-hooks that attach to a threaded rod or ceiling wire.</p> <p><b>Designed to Accommodate a Wide Assortment of Cable Types<br /></b></p> <p>Less expensive and more flexible than cable trays or ladder rack runways, these J-hooks accommodate Cat5e/6/6a, fiber optic, audio/video, coaxial and other cable types. They comply with TIA-56B-C, TIA-569-C and ISO/IEC 14763-2 requirements for structured cabling systems, making them a perfect accessory for contractors, IT staff and cable installers.<br /><br /></p> <p><b>Made from Galvanized Steel to Provide Proper Long-Term Support</b></p> <p>These easy-to-install J-hooks are made from 18-gauge galvanized steel with a zinc-plated finish. To give you an idea of their strength, they offer stress-free support for up to 90 Cat5e cables, 60 Cat6 cables or 35 Cat6a cables. Maximum weight capacity is 60 pounds. Built-in anchor points allow you to use cable ties (sold separately) to secure cabling in place.<br /><b><br />Typical Applications</b></p> <ul> <li>Neatly bundle cable above a drop ceiling or below a raised floor in your data center, network installation or digital signage setup</li> </ul> <p><b> </b></p><br><ul><li>Recommended for network and digital signage cabling above ceilings or below floors</li><li>Made from galvanized steel designed to hold long lengths of cabling up to 60 lb.</li><li>Offers stress-free support for wide range of cables, including fiber, A/V and Cat5e/6</li><li>Built-in anchor points allow use of cable ties to hold cables in place</li><li>Package includes 25 batwing J-hooks that comply with TIA/EIA requirements</li></ul>price:78.060000weight:5.600000manufacturer:Tripp Lite by Eatonimage:/1/5/158505221.jpgsmall_image:/1/5/158505221.jpgthumbnail:/1/5/158505221.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2024-04-14 03:10:22updated_at:2024-04-14 03:10:22country_of_manufacture: custom_layout:No layout updatesmsrp:134.400000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/1/5/158505221.jpgtax_class_id:Taxable Goodsproduct_name:J-Hook Cable Support - 2", Batwing, Galvanized Steel, 25 Packwidth:1.38"product_type:Cable Tyingheight:4.77"manufacturer_part_number:NCM-JHC20-25country_of_origin:Chinabrand_name:Tripp Liteproduct_model:NCM-JHC20-25weight_approximate:2.82 ozdepth:2"product_material:Galvanized Steelenvironmental_certification:RoHS,REACHenvironmentally_friendly:Yesproduct_color:Silverpackaged_quantity:25wesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nosku:EIM6LP469description:<p><b>J-Hooks: An Inexpensive Alternative to Cable Trays</b></p> <p>These two-inch batwing J-hooks are recommended for setting up network or digital signage installations that require cabling to be run above drop ceilings, below raised floors or through inner duct systems for long distances. Tripp Lite's NCM-JHC20-25 comes with 25 swiveling batwing J-hooks that attach to a threaded rod or ceiling wire.</p> <p><b>Designed to Accommodate a Wide Assortment of Cable Types<br /></b></p> <p>Less expensive and more flexible than cable trays or ladder rack runways, these J-hooks accommodate Cat5e/6/6a, fiber optic, audio/video, coaxial and other cable types. They comply with TIA-56B-C, TIA-569-C and ISO/IEC 14763-2 requirements for structured cabling systems, making them a perfect accessory for contractors, IT staff and cable installers.<br /><br /></p> <p><b>Made from Galvanized Steel to Provide Proper Long-Term Support</b></p> <p>These easy-to-install J-hooks are made from 18-gauge galvanized steel with a zinc-plated finish. To give you an idea of their strength, they offer stress-free support for up to 90 Cat5e cables, 60 Cat6 cables or 35 Cat6a cables. Maximum weight capacity is 60 pounds. Built-in anchor points allow you to use cable ties (sold separately) to secure cabling in place.<br /><b><br />Typical Applications</b></p> <ul> <li>Neatly bundle cable above a drop ceiling or below a raised floor in your data center, network installation or digital signage setup</li> </ul> <p><b> </b></p><br><ul><li>Recommended for network and digital signage cabling above ceilings or below floors</li><li>Made from galvanized steel designed to hold long lengths of cabling up to 60 lb.</li><li>Offers stress-free support for wide range of cables, including fiber, A/V and Cat5e/6</li><li>Built-in anchor points allow use of cable ties to hold cables in place</li><li>Package includes 25 batwing J-hooks that comply with TIA/EIA requirements</li></ul>price:78.060000weight:5.600000manufacturer:Tripp Lite by Eatonimage:/1/5/158505221.jpgsmall_image:/1/5/158505221.jpgthumbnail:/1/5/158505221.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2024-04-14 03:10:22updated_at:2024-04-14 03:10:22country_of_manufacture: custom_layout:No layout updatesmsrp:134.400000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/1/5/158505221.jpgtax_class_id:Taxable Goodsproduct_name:J-Hook Cable Support - 2", Batwing, Galvanized Steel, 25 Packwidth:1.38"product_type:Cable Tyingheight:4.77"manufacturer_part_number:NCM-JHC20-25country_of_origin:Chinabrand_name:Tripp Liteproduct_model:NCM-JHC20-25weight_approximate:2.82 ozdepth:2"product_material:Galvanized Steelenvironmental_certification:RoHS,REACHenvironmentally_friendly:Yesproduct_color:Silverpackaged_quantity:25wesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:NoTripp LiteChina2024-04-14 03:10:22-- Please Select --No layout updates2"<p><b>J-Hooks: An Inexpensive Alternative to Cable Trays</b></p> <p>These two-inch batwing J-hooks are recommended for setting up network or digital signage installations that require cabling to be run above drop ceilings, below raised floors or through inner duct systems for long distances. Tripp Lite's NCM-JHC20-25 comes with 25 swiveling batwing J-hooks that attach to a threaded rod or ceiling wire.</p> <p><b>Designed to Accommodate a Wide Assortment of Cable Types<br /></b></p> <p>Less expensive and more flexible than cable trays or ladder rack runways, these J-hooks accommodate Cat5e/6/6a, fiber optic, audio/video, coaxial and other cable types. They comply with TIA-56B-C, TIA-569-C and ISO/IEC 14763-2 requirements for structured cabling systems, making them a perfect accessory for contractors, IT staff and cable installers.<br /><br /></p> <p><b>Made from Galvanized Steel to Provide Proper Long-Term Support</b></p> <p>These easy-to-install J-hooks are made from 18-gauge galvanized steel with a zinc-plated finish. To give you an idea of their strength, they offer stress-free support for up to 90 Cat5e cables, 60 Cat6 cables or 35 Cat6a cables. Maximum weight capacity is 60 pounds. Built-in anchor points allow you to use cable ties (sold separately) to secure cabling in place.<br /><b><br />Typical Applications</b></p> <ul> <li>Neatly bundle cable above a drop ceiling or below a raised floor in your data center, network installation or digital signage setup</li> </ul> <p><b> </b></p><br><ul><li>Recommended for network and digital signage cabling above ceilings or below floors</li><li>Made from galvanized steel designed to hold long lengths of cabling up to 60 lb.</li><li>Offers stress-free support for wide range of cables, including fiber, A/V and Cat5e/6</li><li>Built-in anchor points allow use of cable ties to hold cables in place</li><li>Package includes 25 batwing J-hooks that comply with TIA/EIA requirements</li></ul>YesRoHS,REACHYesNoNo4.77"/1/5/158505221.jpgYesYesTripp Lite by EatonNCM-JHC20-25134.400000Use configBlock after Info Column25No layout updates78.060000Price RangeSilverGalvanized SteelNCM-JHC20-25J-Hook Cable Support - 2", Batwing, Galvanized Steel, 25 PackCable TyingTogetherEIM6LP469/1/5/158505221.jpgEnabledNo/1/5/158505221.jpgNoTaxable Goods/1/5/158505221.jpg2024-04-14 03:10:22YesCatalog, Search5.6000002.82 ozYes1.38"