Splitter Kit Ideal for Digital Signage or Displaying Video in Schools or Trade Show Booths The four-port transmitter/splitter and quad receivers are recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127-004-H4H extends 4K video and stereo audio signals from an HDMI source device to four HDMI displays up to 125 feet (38.1 meters) away via user-supplied Cat6 cabling.
Transmits Crystal-Clear 4K HDMI Video with Multi-Channel Audio and 4:4:4 Color The B127-004-H4H supports Ultra HD video resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. Built-in equalization automatically fine-tunes the image quality at the remote displays with no time-consuming manual fiddling needed. This extender kit is compatible with HDCP 2.2, EDID and HDMI 2.0 standards for carrying HDR (high dynamic range) signals. It also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. The transmitter and receivers are backward compatible with non-4K equipment, so you can use this kit with most HDMI source and display devices.
Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks Built-in Power over Cable (PoC) technology powers the low-profile receivers over Cat6 cable. Green and orange LEDs on the transmitter and receivers light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of bulky power bricks and gives you the freedom to place the receivers away from AC outlets.
Plug-and-Play Operation for Quick Setup and Immediate Use The included transmitter/splitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing the units on walls, poles or 19-inch racks. Connect the transmitter to the source and the receivers to the displays with user-supplied HDMI cables (such as Tripp Lite's P568- or P569-Series). Then, connect the transmitter to the receivers using Cat6 patch cable (such as Tripp Lite N202-Series cable). Connect an optional display to the transmitter's local HDMI output to monitor the image transmitted to the receivers up to 125 feet away.
TAA-Compliant for GSA Schedule Purchases The B127-004-H4H is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Typical Applications
Connect a media server, Blu-ray player, cable/satellite box, Roku, gaming system or other home theater component to four large-screen 4K televisions or projectors
Upgrade the video quality of your trade show presentation or digital signage installation in a commercial or educational setting to 4K x 2K
System Requirements
Source device with HDMI output (Blu-ray player, cable box, laptop)
Display devices with HDMI input (HDTV, projector, monitor)
Transmitter/receiver kit extends a 4K HDMI audio/video signal via Cat6 cable to 4 projectors, monitors or HDTVs up to 125 ft. away.
Delivers UHD picture quality at resolutions up to 3840 x 2160 (4K x 2K) @ 60 Hz
Power over Cable (PoC) technology provides power to the receivers via Cat6 cable
Transmitter's local HDMI port lets you monitor images being shown on remote displays
Supports 4:4:4 chroma subsampling for HDR displays, meeting latest color standards
Supports High Dynamic Range (HDR) for richer contrast and expanded color accuracy
Plug-and-play operation with no software required for easy, immediate installation
Transmitter Unit, 4 x Receiver Units, External Power Supply (Input: 100-240V), 4 x International Plug Adapters (North America, Europe, U.K. and Australia), Mounting Hardware, Owner's Manual
https://www.trivoshop.com/tripp-lite-hdmi-over-cat6-extender-splitter-kit-w-poc-4-port-4k-4-4-4-hdr-taa-eim6nh60117137Tripp Lite HDMI Over Cat6 Extender Splitter Kit w/ PoC 4-Port 4K, 4:4:4, HDR, TAAhttps://www.trivoshop.com/media/catalog/product/8/0/80723872.jpg884.8884.8USDInStock/Network & Communication/Network & Communication/Audio & Video Consoles/Extenders/Top Categories/Networking & Communications31807728<p><b>Splitter Kit Ideal for Digital Signage or Displaying Video in Schools or Trade Show Booths<br /></b>The four-port transmitter/splitter and quad receivers are recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127-004-H4H extends 4K video and stereo audio signals from an HDMI source device to four HDMI displays up to 125 feet (38.1 meters) away via user-supplied Cat6 cabling.</p> <p><b>Transmits Crystal-Clear 4K HDMI Video with Multi-Channel Audio and 4:4:4 Color<br /></b>The B127-004-H4H supports Ultra HD video resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. Built-in equalization automatically fine-tunes the image quality at the remote displays with no time-consuming manual fiddling needed. This extender kit is compatible with HDCP 2.2, EDID and HDMI 2.0 standards for carrying HDR (high dynamic range) signals. It also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. The transmitter and receivers are backward compatible with non-4K equipment, so you can use this kit with most HDMI source and display devices.</p> <p><b>Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks<br /></b>Built-in Power over Cable (PoC) technology powers the low-profile receivers over Cat6 cable. Green and orange LEDs on the transmitter and receivers light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of bulky power bricks and gives you the freedom to place the receivers away from AC outlets.</p> <p><b>Plug-and-Play Operation for Quick Setup and Immediate Use</b><br />The included transmitter/splitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing the units on walls, poles or 19-inch racks. Connect the transmitter to the source and the receivers to the displays with user-supplied HDMI cables (such as Tripp Lite's P568- or P569-Series). Then, connect the transmitter to the receivers using Cat6 patch cable (such as Tripp Lite N202-Series cable). Connect an optional display to the transmitter's local HDMI output to monitor the image transmitted to the receivers up to 125 feet away.</p> <p><b>TAA-Compliant for GSA Schedule Purchases</b><br />The B127-004-H4H is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.</p> <p><b>Typical Applications</b></p> <ul> <li>Connect a media server, Blu-ray player, cable/satellite box, Roku, gaming system or other home theater component to four large-screen 4K televisions or projectors</li> <li>Upgrade the video quality of your trade show presentation or digital signage installation in a commercial or educational setting to 4K x 2K</li> </ul> <p><b>System Requirements</b></p> <ul> <li>Source device with HDMI output (Blu-ray player, cable box, laptop)</li> <li>Display devices with HDMI input (HDTV, projector, monitor)</li> </ul><br><ul><li>Transmitter/receiver kit extends a 4K HDMI audio/video signal via Cat6 cable to 4 projectors, monitors or HDTVs up to 125 ft. away.</li><li>Delivers UHD picture quality at resolutions up to 3840 x 2160 (4K x 2K) @ 60 Hz</li><li>Power over Cable (PoC) technology provides power to the receivers via Cat6 cable</li><li>Transmitter's local HDMI port lets you monitor images being shown on remote displays</li><li>Supports 4:4:4 chroma subsampling for HDR displays, meeting latest color standards</li><li>Supports High Dynamic Range (HDR) for richer contrast and expanded color accuracy</li><li>Plug-and-play operation with no software required for easy, immediate installation</li><li>1-year limited warranty</li></ul>00add-to-cartsku:EIM6NH601description:<p><b>Splitter Kit Ideal for Digital Signage or Displaying Video in Schools or Trade Show Booths<br /></b>The four-port transmitter/splitter and quad receivers are recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127-004-H4H extends 4K video and stereo audio signals from an HDMI source device to four HDMI displays up to 125 feet (38.1 meters) away via user-supplied Cat6 cabling.</p> <p><b>Transmits Crystal-Clear 4K HDMI Video with Multi-Channel Audio and 4:4:4 Color<br /></b>The B127-004-H4H supports Ultra HD video resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. Built-in equalization automatically fine-tunes the image quality at the remote displays with no time-consuming manual fiddling needed. This extender kit is compatible with HDCP 2.2, EDID and HDMI 2.0 standards for carrying HDR (high dynamic range) signals. It also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. The transmitter and receivers are backward compatible with non-4K equipment, so you can use this kit with most HDMI source and display devices.</p> <p><b>Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks<br /></b>Built-in Power over Cable (PoC) technology powers the low-profile receivers over Cat6 cable. Green and orange LEDs on the transmitter and receivers light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of bulky power bricks and gives you the freedom to place the receivers away from AC outlets.</p> <p><b>Plug-and-Play Operation for Quick Setup and Immediate Use</b><br />The included transmitter/splitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing the units on walls, poles or 19-inch racks. Connect the transmitter to the source and the receivers to the displays with user-supplied HDMI cables (such as Tripp Lite's P568- or P569-Series). Then, connect the transmitter to the receivers using Cat6 patch cable (such as Tripp Lite N202-Series cable). Connect an optional display to the transmitter's local HDMI output to monitor the image transmitted to the receivers up to 125 feet away.</p> <p><b>TAA-Compliant for GSA Schedule Purchases</b><br />The B127-004-H4H is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.</p> <p><b>Typical Applications</b></p> <ul> <li>Connect a media server, Blu-ray player, cable/satellite box, Roku, gaming system or other home theater component to four large-screen 4K televisions or projectors</li> <li>Upgrade the video quality of your trade show presentation or digital signage installation in a commercial or educational setting to 4K x 2K</li> </ul> <p><b>System Requirements</b></p> <ul> <li>Source device with HDMI output (Blu-ray player, cable box, laptop)</li> <li>Display devices with HDMI input (HDTV, projector, monitor)</li> </ul><br><ul><li>Transmitter/receiver kit extends a 4K HDMI audio/video signal via Cat6 cable to 4 projectors, monitors or HDTVs up to 125 ft. away.</li><li>Delivers UHD picture quality at resolutions up to 3840 x 2160 (4K x 2K) @ 60 Hz</li><li>Power over Cable (PoC) technology provides power to the receivers via Cat6 cable</li><li>Transmitter's local HDMI port lets you monitor images being shown on remote displays</li><li>Supports 4:4:4 chroma subsampling for HDR displays, meeting latest color standards</li><li>Supports High Dynamic Range (HDR) for richer contrast and expanded color accuracy</li><li>Plug-and-play operation with no software required for easy, immediate installation</li><li>1-year limited warranty</li></ul>price:884.800000weight:4.500000image:/8/0/80723872.jpgsmall_image:/8/0/80723872.jpgthumbnail:/8/0/80723872.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2022-07-27 19:24:11updated_at:2023-05-07 21:39:26country_of_manufacture: custom_layout:No layout updatesmsrp:884.800000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/8/0/80723872.jpgtax_class_id:Taxable Goodsproduct_name:B127-004-H4H Video Extender Transmitter/Receiverproduct_type:Video Extender Transmitter/Receivermanufacturer_part_number:B127-004-H4Hcountry_of_origin:Taiwanlimited_warranty:1 Yearbrand_name:Tripp Liteproduct_model:B127-004-H4Hpackage_contents:Transmitter Unit, 4 x Receiver Units, External Power Supply (Input: 100-240V), 4 x International Plug Adapters (North America, Europe, U.K. and Australia), Mounting Hardware, Owner's Manualform_factor:Rack-mountableenvironmental_certification:REACH,RoHSenvironmentally_friendly:Yesproduct_color:Blacktaa_compliant:Yesreceiver_depth:2.46"receiver_height:1.06"receiver_width:4.53"receiver_weight_approximate:7.84 oztransmitter_weight_approximate:10.40 oztransmitter_height:1.17"transmitter_depth:3.94"transmitter_width:9.25"wesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nowebsite_id:0sku:EIM6NH601description:<p><b>Splitter Kit Ideal for Digital Signage or Displaying Video in Schools or Trade Show Booths<br /></b>The four-port transmitter/splitter and quad receivers are recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127-004-H4H extends 4K video and stereo audio signals from an HDMI source device to four HDMI displays up to 125 feet (38.1 meters) away via user-supplied Cat6 cabling.</p> <p><b>Transmits Crystal-Clear 4K HDMI Video with Multi-Channel Audio and 4:4:4 Color<br /></b>The B127-004-H4H supports Ultra HD video resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. Built-in equalization automatically fine-tunes the image quality at the remote displays with no time-consuming manual fiddling needed. This extender kit is compatible with HDCP 2.2, EDID and HDMI 2.0 standards for carrying HDR (high dynamic range) signals. It also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. The transmitter and receivers are backward compatible with non-4K equipment, so you can use this kit with most HDMI source and display devices.</p> <p><b>Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks<br /></b>Built-in Power over Cable (PoC) technology powers the low-profile receivers over Cat6 cable. Green and orange LEDs on the transmitter and receivers light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of bulky power bricks and gives you the freedom to place the receivers away from AC outlets.</p> <p><b>Plug-and-Play Operation for Quick Setup and Immediate Use</b><br />The included transmitter/splitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing the units on walls, poles or 19-inch racks. Connect the transmitter to the source and the receivers to the displays with user-supplied HDMI cables (such as Tripp Lite's P568- or P569-Series). Then, connect the transmitter to the receivers using Cat6 patch cable (such as Tripp Lite N202-Series cable). Connect an optional display to the transmitter's local HDMI output to monitor the image transmitted to the receivers up to 125 feet away.</p> <p><b>TAA-Compliant for GSA Schedule Purchases</b><br />The B127-004-H4H is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.</p> <p><b>Typical Applications</b></p> <ul> <li>Connect a media server, Blu-ray player, cable/satellite box, Roku, gaming system or other home theater component to four large-screen 4K televisions or projectors</li> <li>Upgrade the video quality of your trade show presentation or digital signage installation in a commercial or educational setting to 4K x 2K</li> </ul> <p><b>System Requirements</b></p> <ul> <li>Source device with HDMI output (Blu-ray player, cable box, laptop)</li> <li>Display devices with HDMI input (HDTV, projector, monitor)</li> </ul><br><ul><li>Transmitter/receiver kit extends a 4K HDMI audio/video signal via Cat6 cable to 4 projectors, monitors or HDTVs up to 125 ft. away.</li><li>Delivers UHD picture quality at resolutions up to 3840 x 2160 (4K x 2K) @ 60 Hz</li><li>Power over Cable (PoC) technology provides power to the receivers via Cat6 cable</li><li>Transmitter's local HDMI port lets you monitor images being shown on remote displays</li><li>Supports 4:4:4 chroma subsampling for HDR displays, meeting latest color standards</li><li>Supports High Dynamic Range (HDR) for richer contrast and expanded color accuracy</li><li>Plug-and-play operation with no software required for easy, immediate installation</li><li>1-year limited warranty</li></ul>price:884.800000weight:4.500000image:/8/0/80723872.jpgsmall_image:/8/0/80723872.jpgthumbnail:/8/0/80723872.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2022-07-27 19:24:11updated_at:2023-05-07 21:39:26country_of_manufacture: custom_layout:No layout updatesmsrp:884.800000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/8/0/80723872.jpgtax_class_id:Taxable Goodsproduct_name:B127-004-H4H Video Extender Transmitter/Receiverproduct_type:Video Extender Transmitter/Receivermanufacturer_part_number:B127-004-H4Hcountry_of_origin:Taiwanlimited_warranty:1 Yearbrand_name:Tripp Liteproduct_model:B127-004-H4Hpackage_contents:Transmitter Unit, 4 x Receiver Units, External Power Supply (Input: 100-240V), 4 x International Plug Adapters (North America, Europe, U.K. and Australia), Mounting Hardware, Owner's Manualform_factor:Rack-mountableenvironmental_certification:REACH,RoHSenvironmentally_friendly:Yesproduct_color:Blacktaa_compliant:Yesreceiver_depth:2.46"receiver_height:1.06"receiver_width:4.53"receiver_weight_approximate:7.84 oztransmitter_weight_approximate:10.40 oztransmitter_height:1.17"transmitter_depth:3.94"transmitter_width:9.25"wesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nowebsite_id:0sku:EIM6NH601description:<p><b>Splitter Kit Ideal for Digital Signage or Displaying Video in Schools or Trade Show Booths<br /></b>The four-port transmitter/splitter and quad receivers are recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127-004-H4H extends 4K video and stereo audio signals from an HDMI source device to four HDMI displays up to 125 feet (38.1 meters) away via user-supplied Cat6 cabling.</p> <p><b>Transmits Crystal-Clear 4K HDMI Video with Multi-Channel Audio and 4:4:4 Color<br /></b>The B127-004-H4H supports Ultra HD video resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. Built-in equalization automatically fine-tunes the image quality at the remote displays with no time-consuming manual fiddling needed. This extender kit is compatible with HDCP 2.2, EDID and HDMI 2.0 standards for carrying HDR (high dynamic range) signals. It also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. The transmitter and receivers are backward compatible with non-4K equipment, so you can use this kit with most HDMI source and display devices.</p> <p><b>Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks<br /></b>Built-in Power over Cable (PoC) technology powers the low-profile receivers over Cat6 cable. Green and orange LEDs on the transmitter and receivers light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of bulky power bricks and gives you the freedom to place the receivers away from AC outlets.</p> <p><b>Plug-and-Play Operation for Quick Setup and Immediate Use</b><br />The included transmitter/splitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing the units on walls, poles or 19-inch racks. Connect the transmitter to the source and the receivers to the displays with user-supplied HDMI cables (such as Tripp Lite's P568- or P569-Series). Then, connect the transmitter to the receivers using Cat6 patch cable (such as Tripp Lite N202-Series cable). Connect an optional display to the transmitter's local HDMI output to monitor the image transmitted to the receivers up to 125 feet away.</p> <p><b>TAA-Compliant for GSA Schedule Purchases</b><br />The B127-004-H4H is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.</p> <p><b>Typical Applications</b></p> <ul> <li>Connect a media server, Blu-ray player, cable/satellite box, Roku, gaming system or other home theater component to four large-screen 4K televisions or projectors</li> <li>Upgrade the video quality of your trade show presentation or digital signage installation in a commercial or educational setting to 4K x 2K</li> </ul> <p><b>System Requirements</b></p> <ul> <li>Source device with HDMI output (Blu-ray player, cable box, laptop)</li> <li>Display devices with HDMI input (HDTV, projector, monitor)</li> </ul><br><ul><li>Transmitter/receiver kit extends a 4K HDMI audio/video signal via Cat6 cable to 4 projectors, monitors or HDTVs up to 125 ft. away.</li><li>Delivers UHD picture quality at resolutions up to 3840 x 2160 (4K x 2K) @ 60 Hz</li><li>Power over Cable (PoC) technology provides power to the receivers via Cat6 cable</li><li>Transmitter's local HDMI port lets you monitor images being shown on remote displays</li><li>Supports 4:4:4 chroma subsampling for HDR displays, meeting latest color standards</li><li>Supports High Dynamic Range (HDR) for richer contrast and expanded color accuracy</li><li>Plug-and-play operation with no software required for easy, immediate installation</li><li>1-year limited warranty</li></ul>price:884.800000weight:4.500000image:/8/0/80723872.jpgsmall_image:/8/0/80723872.jpgthumbnail:/8/0/80723872.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2022-07-27 19:24:11updated_at:2023-05-07 21:39:26country_of_manufacture: custom_layout:No layout updatesmsrp:884.800000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/8/0/80723872.jpgtax_class_id:Taxable Goodsproduct_name:B127-004-H4H Video Extender Transmitter/Receiverproduct_type:Video Extender Transmitter/Receivermanufacturer_part_number:B127-004-H4Hcountry_of_origin:Taiwanlimited_warranty:1 Yearbrand_name:Tripp Liteproduct_model:B127-004-H4Hpackage_contents:Transmitter Unit, 4 x Receiver Units, External Power Supply (Input: 100-240V), 4 x International Plug Adapters (North America, Europe, U.K. and Australia), Mounting Hardware, Owner's Manualform_factor:Rack-mountableenvironmental_certification:REACH,RoHSenvironmentally_friendly:Yesproduct_color:Blacktaa_compliant:Yesreceiver_depth:2.46"receiver_height:1.06"receiver_width:4.53"receiver_weight_approximate:7.84 oztransmitter_weight_approximate:10.40 oztransmitter_height:1.17"transmitter_depth:3.94"transmitter_width:9.25"wesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nowebsite_id:0Tripp LiteTaiwan2022-07-27 19:24:11-- Please Select --No layout updates<p><b>Splitter Kit Ideal for Digital Signage or Displaying Video in Schools or Trade Show Booths<br /></b>The four-port transmitter/splitter and quad receivers are recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127-004-H4H extends 4K video and stereo audio signals from an HDMI source device to four HDMI displays up to 125 feet (38.1 meters) away via user-supplied Cat6 cabling.</p> <p><b>Transmits Crystal-Clear 4K HDMI Video with Multi-Channel Audio and 4:4:4 Color<br /></b>The B127-004-H4H supports Ultra HD video resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. Built-in equalization automatically fine-tunes the image quality at the remote displays with no time-consuming manual fiddling needed. This extender kit is compatible with HDCP 2.2, EDID and HDMI 2.0 standards for carrying HDR (high dynamic range) signals. It also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. The transmitter and receivers are backward compatible with non-4K equipment, so you can use this kit with most HDMI source and display devices.</p> <p><b>Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks<br /></b>Built-in Power over Cable (PoC) technology powers the low-profile receivers over Cat6 cable. Green and orange LEDs on the transmitter and receivers light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of bulky power bricks and gives you the freedom to place the receivers away from AC outlets.</p> <p><b>Plug-and-Play Operation for Quick Setup and Immediate Use</b><br />The included transmitter/splitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing the units on walls, poles or 19-inch racks. Connect the transmitter to the source and the receivers to the displays with user-supplied HDMI cables (such as Tripp Lite's P568- or P569-Series). Then, connect the transmitter to the receivers using Cat6 patch cable (such as Tripp Lite N202-Series cable). Connect an optional display to the transmitter's local HDMI output to monitor the image transmitted to the receivers up to 125 feet away.</p> <p><b>TAA-Compliant for GSA Schedule Purchases</b><br />The B127-004-H4H is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.</p> <p><b>Typical Applications</b></p> <ul> <li>Connect a media server, Blu-ray player, cable/satellite box, Roku, gaming system or other home theater component to four large-screen 4K televisions or projectors</li> <li>Upgrade the video quality of your trade show presentation or digital signage installation in a commercial or educational setting to 4K x 2K</li> </ul> <p><b>System Requirements</b></p> <ul> <li>Source device with HDMI output (Blu-ray player, cable box, laptop)</li> <li>Display devices with HDMI input (HDTV, projector, monitor)</li> </ul><br><ul><li>Transmitter/receiver kit extends a 4K HDMI audio/video signal via Cat6 cable to 4 projectors, monitors or HDTVs up to 125 ft. away.</li><li>Delivers UHD picture quality at resolutions up to 3840 x 2160 (4K x 2K) @ 60 Hz</li><li>Power over Cable (PoC) technology provides power to the receivers via Cat6 cable</li><li>Transmitter's local HDMI port lets you monitor images being shown on remote displays</li><li>Supports 4:4:4 chroma subsampling for HDR displays, meeting latest color standards</li><li>Supports High Dynamic Range (HDR) for richer contrast and expanded color accuracy</li><li>Plug-and-play operation with no software required for easy, immediate installation</li><li>1-year limited warranty</li></ul>YesREACH,RoHSYesRack-mountableNoNo/8/0/80723872.jpgYesYes1 YearB127-004-H4H884.800000Use configBlock after Info ColumnTransmitter Unit, 4 x Receiver Units, External Power Supply (Input: 100-240V), 4 x International Plug Adapters (North America, Europe, U.K. and Australia), Mounting Hardware, Owner's ManualNo layout updates884.800000Price RangeBlackB127-004-H4HB127-004-H4H Video Extender Transmitter/ReceiverVideo Extender Transmitter/Receiver2.46"1.06"7.84 oz4.53"TogetherEIM6NH601/8/0/80723872.jpgEnabledNo/8/0/80723872.jpgNoYesTaxable Goods/8/0/80723872.jpg3.94"1.17"10.40 oz9.25"2023-05-07 21:39:26YesCatalog, Search04.500000Yes
