The most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit.
Quickly test, verify, and troubleshoot 1Gig, Multi-Gig and 10Gig Ethernet (copper, fiber) including line-rate performance testing and packet capture
Layer 1 - 7 AutoTest enables any technician to find network problems
Monitor networks for intermittent issues, every minute for up to 24 hours
Install, test, verify and troubleshoot technology upgrades, Multi-Gig (NBASE-T) and 10G networks with advanced AndroidTM-based troubleshooting apps and purpose-built test hardware
Physical layer testing includes cable (TDR) testing, toning, wiremapping, and cable SNR (Signal-to-Noise Ratio) for Multi-Gig links
Compatibility with standards-compliant SFPs enables test and validation
of any wired media (copper or fiber) for a variety of use models
Validate up to 90W 802.3bt PSE with TruePower™ loaded Power over Ethernet (PoE) test
Serves as a peer to the EtherScope™ nXG for line-rate performance testing to verify network capacity, performance and QoS, as well as service provider SLAs between sites
The most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit.
Quickly test, verify, and troubleshoot 1Gig, Multi-Gig and 10Gig Ethernet (copper, fiber) including line-rate performance testing and packet capture
Layer 1 - 7 AutoTest enables any technician to find network problems
Monitor networks for intermittent issues, every minute for up to 24 hours
Install, test, verify and troubleshoot technology upgrades, Multi-Gig (NBASE-T) and 10G networks with advanced AndroidTM-based troubleshooting apps and purpose-built test hardware
Physical layer testing includes cable (TDR) testing, toning, wiremapping, and cable SNR (Signal-to-Noise Ratio) for Multi-Gig links
Compatibility with standards-compliant SFPs enables test and validation
of any wired media (copper or fiber) for a variety of use models
Validate up to 90W 802.3bt PSE with TruePower™ loaded Power over Ethernet (PoE) test
Serves as a peer to the EtherScope™ nXG for line-rate performance testing to verify network capacity, performance and QoS, as well as service provider SLAs between sites
https://www.trivoshop.com/linkrunnerr-10g-advanced-ethernet-tester-eim8ct682125LinkRunner® 10G Advanced Ethernet Testerhttps://www.trivoshop.com/media/catalog/product/E/I/EIM8CT682.jpg56955695USDInStock/Accessories/Accessories/Test Equipment1245<b>Cost-Effective, Line-Rate 10Gig Ethernet Testing.</b> <br /><br />The most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. <ul> <li>Quickly test, verify, and troubleshoot 1Gig, Multi-Gig and 10Gig Ethernet (copper, fiber) including line-rate performance testing and packet capture</li> <li>Layer 1 - 7 AutoTest enables any technician to find network problems</li> <li>Monitor networks for intermittent issues, every minute for up to 24 hours</li> </ul> <p><a id="gfk-spex-minisite" rel="nofollow" href="javascript:void(0)" onclick="javascript:window.open('//content.etilize.com/mini-site/en_us/1064637745.html','_blank','height=800,width=780,resizable=yes,scrollbars=yes,toolbar=no,menubar=no,location=no,directories=no,status=no');return false;">More from the Manufacturer</a></p><br><ul><li>Install, test, verify and troubleshoot technology upgrades, Multi-Gig (NBASE-T) and 10G networks with advanced AndroidTM-based troubleshooting apps and purpose-built test hardware</li><li>Physical layer testing includes cable (TDR) testing, toning, wiremapping, and cable SNR (Signal-to-Noise Ratio) for Multi-Gig links</li><li>Compatibility with standards-compliant SFPs enables test and validation</li><li>of any wired media (copper or fiber) for a variety of use models</li><li>Validate up to 90W 802.3bt PSE with TruePower™ loaded Power over Ethernet (PoE) test</li><li>Serves as a peer to the EtherScope™ nXG for line-rate performance testing to verify network capacity, performance and QoS, as well as service provider SLAs between sites</li></ul> <b>Cost-Effective, Line-Rate 10Gig Ethernet Testing.</b> <br /><br />The most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. <ul> <li>Quickly test, verify, and troubleshoot 1Gig, Multi-Gig and 10Gig Ethernet (copper, fiber) including line-rate performance testing and packet capture</li> <li>Layer 1 - 7 AutoTest enables any technician to find network problems</li> <li>Monitor networks for intermittent issues, every minute for up to 24 hours</li> </ul> <p><a id="gfk-spex-minisite" rel="nofollow" href="javascript:void(0)" onclick="javascript:window.open('//content.etilize.com/mini-site/en_us/1064637745.html','_blank','height=800,width=780,resizable=yes,scrollbars=yes,toolbar=no,menubar=no,location=no,directories=no,status=no');return false;">More from the Manufacturer</a></p><br><ul><li>Install, test, verify and troubleshoot technology upgrades, Multi-Gig (NBASE-T) and 10G networks with advanced AndroidTM-based troubleshooting apps and purpose-built test hardware</li><li>Physical layer testing includes cable (TDR) testing, toning, wiremapping, and cable SNR (Signal-to-Noise Ratio) for Multi-Gig links</li><li>Compatibility with standards-compliant SFPs enables test and validation</li><li>of any wired media (copper or fiber) for a variety of use models</li><li>Validate up to 90W 802.3bt PSE with TruePower™ loaded Power over Ethernet (PoE) test</li><li>Serves as a peer to the EtherScope™ nXG for line-rate performance testing to verify network capacity, performance and QoS, as well as service provider SLAs between sites</li></ul>00add-to-cartsku:EIM8CT682description:<b>Cost-Effective, Line-Rate 10Gig Ethernet Testing.</b> <br /><br />The most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. <ul> <li>Quickly test, verify, and troubleshoot 1Gig, Multi-Gig and 10Gig Ethernet (copper, fiber) including line-rate performance testing and packet capture</li> <li>Layer 1 - 7 AutoTest enables any technician to find network problems</li> <li>Monitor networks for intermittent issues, every minute for up to 24 hours</li> </ul> <p><a id="gfk-spex-minisite" rel="nofollow" href="javascript:void(0)" onclick="javascript:window.open('//content.etilize.com/mini-site/en_us/1064637745.html','_blank','height=800,width=780,resizable=yes,scrollbars=yes,toolbar=no,menubar=no,location=no,directories=no,status=no');return false;">More from the Manufacturer</a></p><br><ul><li>Install, test, verify and troubleshoot technology upgrades, Multi-Gig (NBASE-T) and 10G networks with advanced AndroidTM-based troubleshooting apps and purpose-built test hardware</li><li>Physical layer testing includes cable (TDR) testing, toning, wiremapping, and cable SNR (Signal-to-Noise Ratio) for Multi-Gig links</li><li>Compatibility with standards-compliant SFPs enables test and validation</li><li>of any wired media (copper or fiber) for a variety of use models</li><li>Validate up to 90W 802.3bt PSE with TruePower™ loaded Power over Ethernet (PoE) test</li><li>Serves as a peer to the EtherScope™ nXG for line-rate performance testing to verify network capacity, performance and QoS, as well as service provider SLAs between sites</li></ul>short_description:<b>Cost-Effective, Line-Rate 10Gig Ethernet Testing.</b> <br /><br />The most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. <ul> <li>Quickly test, verify, and troubleshoot 1Gig, Multi-Gig and 10Gig Ethernet (copper, fiber) including line-rate performance testing and packet capture</li> <li>Layer 1 - 7 AutoTest enables any technician to find network problems</li> <li>Monitor networks for intermittent issues, every minute for up to 24 hours</li> </ul> <p><a id="gfk-spex-minisite" rel="nofollow" href="javascript:void(0)" onclick="javascript:window.open('//content.etilize.com/mini-site/en_us/1064637745.html','_blank','height=800,width=780,resizable=yes,scrollbars=yes,toolbar=no,menubar=no,location=no,directories=no,status=no');return false;">More from the Manufacturer</a></p><br><ul><li>Install, test, verify and troubleshoot technology upgrades, Multi-Gig (NBASE-T) and 10G networks with advanced AndroidTM-based troubleshooting apps and purpose-built test hardware</li><li>Physical layer testing includes cable (TDR) testing, toning, wiremapping, and cable SNR (Signal-to-Noise Ratio) for Multi-Gig links</li><li>Compatibility with standards-compliant SFPs enables test and validation</li><li>of any wired media (copper or fiber) for a variety of use models</li><li>Validate up to 90W 802.3bt PSE with TruePower™ loaded Power over Ethernet (PoE) test</li><li>Serves as a peer to the EtherScope™ nXG for line-rate performance testing to verify network capacity, performance and QoS, as well as service provider SLAs between sites</li></ul>price:5695.000000weight:1.000000image:/E/I/EIM8CT682.jpgsmall_image:/E/I/EIM8CT682.jpgthumbnail:/E/I/EIM8CT682.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2022-07-25 18:57:21updated_at:2023-05-08 03:36:51country_of_manufacture: custom_layout:No layout updatesmsrp:5695.000000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/E/I/EIM8CT682.jpgtax_class_id:Taxable Goodsproduct_name:LinkRunner 10Gwidth:4.1"product_type:Network Testing Deviceheight:7.7"manufacturer_part_number:LR10G-100country_of_origin:United Statesbrand_name:NetAllywesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nowebsite_id:0sku:EIM8CT682description:<b>Cost-Effective, Line-Rate 10Gig Ethernet Testing.</b> <br /><br />The most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. <ul> <li>Quickly test, verify, and troubleshoot 1Gig, Multi-Gig and 10Gig Ethernet (copper, fiber) including line-rate performance testing and packet capture</li> <li>Layer 1 - 7 AutoTest enables any technician to find network problems</li> <li>Monitor networks for intermittent issues, every minute for up to 24 hours</li> </ul> <p><a id="gfk-spex-minisite" rel="nofollow" href="javascript:void(0)" onclick="javascript:window.open('//content.etilize.com/mini-site/en_us/1064637745.html','_blank','height=800,width=780,resizable=yes,scrollbars=yes,toolbar=no,menubar=no,location=no,directories=no,status=no');return false;">More from the Manufacturer</a></p><br><ul><li>Install, test, verify and troubleshoot technology upgrades, Multi-Gig (NBASE-T) and 10G networks with advanced AndroidTM-based troubleshooting apps and purpose-built test hardware</li><li>Physical layer testing includes cable (TDR) testing, toning, wiremapping, and cable SNR (Signal-to-Noise Ratio) for Multi-Gig links</li><li>Compatibility with standards-compliant SFPs enables test and validation</li><li>of any wired media (copper or fiber) for a variety of use models</li><li>Validate up to 90W 802.3bt PSE with TruePower™ loaded Power over Ethernet (PoE) test</li><li>Serves as a peer to the EtherScope™ nXG for line-rate performance testing to verify network capacity, performance and QoS, as well as service provider SLAs between sites</li></ul>short_description:<b>Cost-Effective, Line-Rate 10Gig Ethernet Testing.</b> <br /><br />The most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. <ul> <li>Quickly test, verify, and troubleshoot 1Gig, Multi-Gig and 10Gig Ethernet (copper, fiber) including line-rate performance testing and packet capture</li> <li>Layer 1 - 7 AutoTest enables any technician to find network problems</li> <li>Monitor networks for intermittent issues, every minute for up to 24 hours</li> </ul> <p><a id="gfk-spex-minisite" rel="nofollow" href="javascript:void(0)" onclick="javascript:window.open('//content.etilize.com/mini-site/en_us/1064637745.html','_blank','height=800,width=780,resizable=yes,scrollbars=yes,toolbar=no,menubar=no,location=no,directories=no,status=no');return false;">More from the Manufacturer</a></p><br><ul><li>Install, test, verify and troubleshoot technology upgrades, Multi-Gig (NBASE-T) and 10G networks with advanced AndroidTM-based troubleshooting apps and purpose-built test hardware</li><li>Physical layer testing includes cable (TDR) testing, toning, wiremapping, and cable SNR (Signal-to-Noise Ratio) for Multi-Gig links</li><li>Compatibility with standards-compliant SFPs enables test and validation</li><li>of any wired media (copper or fiber) for a variety of use models</li><li>Validate up to 90W 802.3bt PSE with TruePower™ loaded Power over Ethernet (PoE) test</li><li>Serves as a peer to the EtherScope™ nXG for line-rate performance testing to verify network capacity, performance and QoS, as well as service provider SLAs between sites</li></ul>price:5695.000000weight:1.000000image:/E/I/EIM8CT682.jpgsmall_image:/E/I/EIM8CT682.jpgthumbnail:/E/I/EIM8CT682.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2022-07-25 18:57:21updated_at:2023-05-08 03:36:51country_of_manufacture: custom_layout:No layout updatesmsrp:5695.000000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/E/I/EIM8CT682.jpgtax_class_id:Taxable Goodsproduct_name:LinkRunner 10Gwidth:4.1"product_type:Network Testing Deviceheight:7.7"manufacturer_part_number:LR10G-100country_of_origin:United Statesbrand_name:NetAllywesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nowebsite_id:0sku:EIM8CT682description:<b>Cost-Effective, Line-Rate 10Gig Ethernet Testing.</b> <br /><br />The most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. <ul> <li>Quickly test, verify, and troubleshoot 1Gig, Multi-Gig and 10Gig Ethernet (copper, fiber) including line-rate performance testing and packet capture</li> <li>Layer 1 - 7 AutoTest enables any technician to find network problems</li> <li>Monitor networks for intermittent issues, every minute for up to 24 hours</li> </ul> <p><a id="gfk-spex-minisite" rel="nofollow" href="javascript:void(0)" onclick="javascript:window.open('//content.etilize.com/mini-site/en_us/1064637745.html','_blank','height=800,width=780,resizable=yes,scrollbars=yes,toolbar=no,menubar=no,location=no,directories=no,status=no');return false;">More from the Manufacturer</a></p><br><ul><li>Install, test, verify and troubleshoot technology upgrades, Multi-Gig (NBASE-T) and 10G networks with advanced AndroidTM-based troubleshooting apps and purpose-built test hardware</li><li>Physical layer testing includes cable (TDR) testing, toning, wiremapping, and cable SNR (Signal-to-Noise Ratio) for Multi-Gig links</li><li>Compatibility with standards-compliant SFPs enables test and validation</li><li>of any wired media (copper or fiber) for a variety of use models</li><li>Validate up to 90W 802.3bt PSE with TruePower™ loaded Power over Ethernet (PoE) test</li><li>Serves as a peer to the EtherScope™ nXG for line-rate performance testing to verify network capacity, performance and QoS, as well as service provider SLAs between sites</li></ul>short_description:<b>Cost-Effective, Line-Rate 10Gig Ethernet Testing.</b> <br /><br />The most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. <ul> <li>Quickly test, verify, and troubleshoot 1Gig, Multi-Gig and 10Gig Ethernet (copper, fiber) including line-rate performance testing and packet capture</li> <li>Layer 1 - 7 AutoTest enables any technician to find network problems</li> <li>Monitor networks for intermittent issues, every minute for up to 24 hours</li> </ul> <p><a id="gfk-spex-minisite" rel="nofollow" href="javascript:void(0)" onclick="javascript:window.open('//content.etilize.com/mini-site/en_us/1064637745.html','_blank','height=800,width=780,resizable=yes,scrollbars=yes,toolbar=no,menubar=no,location=no,directories=no,status=no');return false;">More from the Manufacturer</a></p><br><ul><li>Install, test, verify and troubleshoot technology upgrades, Multi-Gig (NBASE-T) and 10G networks with advanced AndroidTM-based troubleshooting apps and purpose-built test hardware</li><li>Physical layer testing includes cable (TDR) testing, toning, wiremapping, and cable SNR (Signal-to-Noise Ratio) for Multi-Gig links</li><li>Compatibility with standards-compliant SFPs enables test and validation</li><li>of any wired media (copper or fiber) for a variety of use models</li><li>Validate up to 90W 802.3bt PSE with TruePower™ loaded Power over Ethernet (PoE) test</li><li>Serves as a peer to the EtherScope™ nXG for line-rate performance testing to verify network capacity, performance and QoS, as well as service provider SLAs between sites</li></ul>price:5695.000000weight:1.000000image:/E/I/EIM8CT682.jpgsmall_image:/E/I/EIM8CT682.jpgthumbnail:/E/I/EIM8CT682.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2022-07-25 18:57:21updated_at:2023-05-08 03:36:51country_of_manufacture: custom_layout:No layout updatesmsrp:5695.000000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/E/I/EIM8CT682.jpgtax_class_id:Taxable Goodsproduct_name:LinkRunner 10Gwidth:4.1"product_type:Network Testing Deviceheight:7.7"manufacturer_part_number:LR10G-100country_of_origin:United Statesbrand_name:NetAllywesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nowebsite_id:0NetAllyUnited States2022-07-25 18:57:21-- Please Select --No layout updates<b>Cost-Effective, Line-Rate 10Gig Ethernet Testing.</b> <br /><br />The most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. <ul> <li>Quickly test, verify, and troubleshoot 1Gig, Multi-Gig and 10Gig Ethernet (copper, fiber) including line-rate performance testing and packet capture</li> <li>Layer 1 - 7 AutoTest enables any technician to find network problems</li> <li>Monitor networks for intermittent issues, every minute for up to 24 hours</li> </ul> <p><a id="gfk-spex-minisite" rel="nofollow" href="javascript:void(0)" onclick="javascript:window.open('//content.etilize.com/mini-site/en_us/1064637745.html','_blank','height=800,width=780,resizable=yes,scrollbars=yes,toolbar=no,menubar=no,location=no,directories=no,status=no');return false;">More from the Manufacturer</a></p><br><ul><li>Install, test, verify and troubleshoot technology upgrades, Multi-Gig (NBASE-T) and 10G networks with advanced AndroidTM-based troubleshooting apps and purpose-built test hardware</li><li>Physical layer testing includes cable (TDR) testing, toning, wiremapping, and cable SNR (Signal-to-Noise Ratio) for Multi-Gig links</li><li>Compatibility with standards-compliant SFPs enables test and validation</li><li>of any wired media (copper or fiber) for a variety of use models</li><li>Validate up to 90W 802.3bt PSE with TruePower™ loaded Power over Ethernet (PoE) test</li><li>Serves as a peer to the EtherScope™ nXG for line-rate performance testing to verify network capacity, performance and QoS, as well as service provider SLAs between sites</li></ul>YesNoNo7.7"/E/I/EIM8CT682.jpgYesYesLR10G-1005695.000000Use configBlock after Info ColumnNo layout updates5695.000000Price RangeLinkRunner 10GNetwork Testing DeviceTogether<b>Cost-Effective, Line-Rate 10Gig Ethernet Testing.</b> <br /><br />The most cost-effective solution for 10 Gig network testing. LinkRunner 10G simplifies testing and configuration of copper and fiber Ethernet networks, streamlining workflows by combining essential functions of installation and triage in a single, ruggedized unit. <ul> <li>Quickly test, verify, and troubleshoot 1Gig, Multi-Gig and 10Gig Ethernet (copper, fiber) including line-rate performance testing and packet capture</li> <li>Layer 1 - 7 AutoTest enables any technician to find network problems</li> <li>Monitor networks for intermittent issues, every minute for up to 24 hours</li> </ul> <p><a id="gfk-spex-minisite" rel="nofollow" href="javascript:void(0)" onclick="javascript:window.open('//content.etilize.com/mini-site/en_us/1064637745.html','_blank','height=800,width=780,resizable=yes,scrollbars=yes,toolbar=no,menubar=no,location=no,directories=no,status=no');return false;">More from the Manufacturer</a></p><br><ul><li>Install, test, verify and troubleshoot technology upgrades, Multi-Gig (NBASE-T) and 10G networks with advanced AndroidTM-based troubleshooting apps and purpose-built test hardware</li><li>Physical layer testing includes cable (TDR) testing, toning, wiremapping, and cable SNR (Signal-to-Noise Ratio) for Multi-Gig links</li><li>Compatibility with standards-compliant SFPs enables test and validation</li><li>of any wired media (copper or fiber) for a variety of use models</li><li>Validate up to 90W 802.3bt PSE with TruePower™ loaded Power over Ethernet (PoE) test</li><li>Serves as a peer to the EtherScope™ nXG for line-rate performance testing to verify network capacity, performance and QoS, as well as service provider SLAs between sites</li></ul>EIM8CT682/E/I/EIM8CT682.jpgEnabledNo/E/I/EIM8CT682.jpgNoTaxable Goods/E/I/EIM8CT682.jpg2023-05-08 03:36:51YesCatalog, Search01.000000Yes4.1"