This Pre-Polished Fiber Optic Connector can save technicians a ton of time in the field. These connectors are so easy to install, you can do it in a minute! There's no hand polishing. No epoxy!
Proven mechanical splice technology ensures precise fiber alignment. A factory pre-cleaved, factory-polished ferrule couples to the fiber being terminated with precise mechanical alignment. A proprietary index-matching gel ensures a low loss termination to 62.5-micron multimode optical fibers. There are no expensive tools, no messy epoxy needed.
A factory-installed wedge clip holds the clamping device open while the fiber is inserted. This clip also enables the use of a Visible Fault Identifier (VFI) to provide a "pass/fail" signal once physical contact is achieved. The connector is compatible with 250-um, and 900-um optical fibers.
This connector is also available in ST and SC versions and for 50-micron multimode and single-mode fiber, as well as for OM3 laser-optimized multimode fiber. Connectors for each fiber type are color-coded to industry standard requirements to help with identification during and after installation.
https://www.trivoshop.com/black-box-pre-polished-fiber-optic-connector-om1-multimode-lc-beige-6-pack-ets3539666212058Black Box Pre-Polished Fiber Optic Connector - OM1, Multimode, LC, Beige, 6-Packhttps://www.trivoshop.com/media/catalog/product/8/0/80791939.jpg123.57123.57USDInStock/Hardware Connectivity/Hardware Connectivity/Connectors/Top Categories/Computers, Laptops & Accessories483037716<p>This Pre-Polished Fiber Optic Connector can save technicians a ton of time in the field. These connectors are so easy to install, you can do it in a minute! There's no hand polishing. No epoxy!<br /><br />Proven mechanical splice technology ensures precise fiber alignment. A factory pre-cleaved, factory-polished ferrule couples to the fiber being terminated with precise mechanical alignment. A proprietary index-matching gel ensures a low loss termination to 62.5-micron multimode optical fibers. There are no expensive tools, no messy epoxy needed.<br /><br />A factory-installed wedge clip holds the clamping device open while the fiber is inserted. This clip also enables the use of a Visible Fault Identifier (VFI) to provide a "pass/fail" signal once physical contact is achieved. The connector is compatible with 250-um, and 900-um optical fibers.<br /><br />This connector is also available in ST and SC versions and for 50-micron multimode and single-mode fiber, as well as for OM3 laser-optimized multimode fiber. Connectors for each fiber type are color-coded to industry standard requirements to help with identification during and after installation.</p><br><ul><li>Meets TIA/EIA 568A performance requirements and TIA/EIA 604 (focis) connector interface specifications.</li><li>Fiber can be reseated.</li><li>Factory polishing eliminates loss concerns.</li><li>Easy assembly with no need for epoxy.</li><li>Pre-polished ferrules for fast connections in the field.</li></ul>00add-to-cartsku:ETS3539666description:<p>This Pre-Polished Fiber Optic Connector can save technicians a ton of time in the field. These connectors are so easy to install, you can do it in a minute! There's no hand polishing. No epoxy!<br /><br />Proven mechanical splice technology ensures precise fiber alignment. A factory pre-cleaved, factory-polished ferrule couples to the fiber being terminated with precise mechanical alignment. A proprietary index-matching gel ensures a low loss termination to 62.5-micron multimode optical fibers. There are no expensive tools, no messy epoxy needed.<br /><br />A factory-installed wedge clip holds the clamping device open while the fiber is inserted. This clip also enables the use of a Visible Fault Identifier (VFI) to provide a "pass/fail" signal once physical contact is achieved. The connector is compatible with 250-um, and 900-um optical fibers.<br /><br />This connector is also available in ST and SC versions and for 50-micron multimode and single-mode fiber, as well as for OM3 laser-optimized multimode fiber. Connectors for each fiber type are color-coded to industry standard requirements to help with identification during and after installation.</p><br><ul><li>Meets TIA/EIA 568A performance requirements and TIA/EIA 604 (focis) connector interface specifications.</li><li>Fiber can be reseated.</li><li>Factory polishing eliminates loss concerns.</li><li>Easy assembly with no need for epoxy.</li><li>Pre-polished ferrules for fast connections in the field.</li></ul>price:123.570000weight:0.220000image:/8/0/80791939.jpgsmall_image:/8/0/80791939.jpgthumbnail:/8/0/80791939.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2022-09-29 19:34:10updated_at:2023-04-30 03:19:14country_of_manufacture: custom_layout:No layout updatesmsrp:123.570000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/8/0/80791939.jpgtax_class_id:Taxable Goodsproduct_name:Pre-Polished Fiber Optic Connector - OM1, Multimode, LC, Beige, 6-Packwidth:8.3"product_type:Network Connectorheight:1"manufacturer_part_number:PP-LC-625MM-6PAKcountry_of_origin:Mexicolimited_warranty:Lifetimebrand_name:Black Boxweight_approximate:3.49 ozdepth:8"environmental_certification:WEEEenvironmentally_friendly:Yesproduct_color:Beigepackaged_quantity:6taa_compliant:Yeswesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nowebsite_id:0sku:ETS3539666description:<p>This Pre-Polished Fiber Optic Connector can save technicians a ton of time in the field. These connectors are so easy to install, you can do it in a minute! There's no hand polishing. No epoxy!<br /><br />Proven mechanical splice technology ensures precise fiber alignment. A factory pre-cleaved, factory-polished ferrule couples to the fiber being terminated with precise mechanical alignment. A proprietary index-matching gel ensures a low loss termination to 62.5-micron multimode optical fibers. There are no expensive tools, no messy epoxy needed.<br /><br />A factory-installed wedge clip holds the clamping device open while the fiber is inserted. This clip also enables the use of a Visible Fault Identifier (VFI) to provide a "pass/fail" signal once physical contact is achieved. The connector is compatible with 250-um, and 900-um optical fibers.<br /><br />This connector is also available in ST and SC versions and for 50-micron multimode and single-mode fiber, as well as for OM3 laser-optimized multimode fiber. Connectors for each fiber type are color-coded to industry standard requirements to help with identification during and after installation.</p><br><ul><li>Meets TIA/EIA 568A performance requirements and TIA/EIA 604 (focis) connector interface specifications.</li><li>Fiber can be reseated.</li><li>Factory polishing eliminates loss concerns.</li><li>Easy assembly with no need for epoxy.</li><li>Pre-polished ferrules for fast connections in the field.</li></ul>price:123.570000weight:0.220000image:/8/0/80791939.jpgsmall_image:/8/0/80791939.jpgthumbnail:/8/0/80791939.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2022-09-29 19:34:10updated_at:2023-04-30 03:19:14country_of_manufacture: custom_layout:No layout updatesmsrp:123.570000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/8/0/80791939.jpgtax_class_id:Taxable Goodsproduct_name:Pre-Polished Fiber Optic Connector - OM1, Multimode, LC, Beige, 6-Packwidth:8.3"product_type:Network Connectorheight:1"manufacturer_part_number:PP-LC-625MM-6PAKcountry_of_origin:Mexicolimited_warranty:Lifetimebrand_name:Black Boxweight_approximate:3.49 ozdepth:8"environmental_certification:WEEEenvironmentally_friendly:Yesproduct_color:Beigepackaged_quantity:6taa_compliant:Yeswesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nowebsite_id:0sku:ETS3539666description:<p>This Pre-Polished Fiber Optic Connector can save technicians a ton of time in the field. These connectors are so easy to install, you can do it in a minute! There's no hand polishing. No epoxy!<br /><br />Proven mechanical splice technology ensures precise fiber alignment. A factory pre-cleaved, factory-polished ferrule couples to the fiber being terminated with precise mechanical alignment. A proprietary index-matching gel ensures a low loss termination to 62.5-micron multimode optical fibers. There are no expensive tools, no messy epoxy needed.<br /><br />A factory-installed wedge clip holds the clamping device open while the fiber is inserted. This clip also enables the use of a Visible Fault Identifier (VFI) to provide a "pass/fail" signal once physical contact is achieved. The connector is compatible with 250-um, and 900-um optical fibers.<br /><br />This connector is also available in ST and SC versions and for 50-micron multimode and single-mode fiber, as well as for OM3 laser-optimized multimode fiber. Connectors for each fiber type are color-coded to industry standard requirements to help with identification during and after installation.</p><br><ul><li>Meets TIA/EIA 568A performance requirements and TIA/EIA 604 (focis) connector interface specifications.</li><li>Fiber can be reseated.</li><li>Factory polishing eliminates loss concerns.</li><li>Easy assembly with no need for epoxy.</li><li>Pre-polished ferrules for fast connections in the field.</li></ul>price:123.570000weight:0.220000image:/8/0/80791939.jpgsmall_image:/8/0/80791939.jpgthumbnail:/8/0/80791939.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2022-09-29 19:34:10updated_at:2023-04-30 03:19:14country_of_manufacture: custom_layout:No layout updatesmsrp:123.570000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/8/0/80791939.jpgtax_class_id:Taxable Goodsproduct_name:Pre-Polished Fiber Optic Connector - OM1, Multimode, LC, Beige, 6-Packwidth:8.3"product_type:Network Connectorheight:1"manufacturer_part_number:PP-LC-625MM-6PAKcountry_of_origin:Mexicolimited_warranty:Lifetimebrand_name:Black Boxweight_approximate:3.49 ozdepth:8"environmental_certification:WEEEenvironmentally_friendly:Yesproduct_color:Beigepackaged_quantity:6taa_compliant:Yeswesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nowebsite_id:0Black BoxMexico2022-09-29 19:34:10-- Please Select --No layout updates8"<p>This Pre-Polished Fiber Optic Connector can save technicians a ton of time in the field. These connectors are so easy to install, you can do it in a minute! There's no hand polishing. No epoxy!<br /><br />Proven mechanical splice technology ensures precise fiber alignment. A factory pre-cleaved, factory-polished ferrule couples to the fiber being terminated with precise mechanical alignment. A proprietary index-matching gel ensures a low loss termination to 62.5-micron multimode optical fibers. There are no expensive tools, no messy epoxy needed.<br /><br />A factory-installed wedge clip holds the clamping device open while the fiber is inserted. This clip also enables the use of a Visible Fault Identifier (VFI) to provide a "pass/fail" signal once physical contact is achieved. The connector is compatible with 250-um, and 900-um optical fibers.<br /><br />This connector is also available in ST and SC versions and for 50-micron multimode and single-mode fiber, as well as for OM3 laser-optimized multimode fiber. Connectors for each fiber type are color-coded to industry standard requirements to help with identification during and after installation.</p><br><ul><li>Meets TIA/EIA 568A performance requirements and TIA/EIA 604 (focis) connector interface specifications.</li><li>Fiber can be reseated.</li><li>Factory polishing eliminates loss concerns.</li><li>Easy assembly with no need for epoxy.</li><li>Pre-polished ferrules for fast connections in the field.</li></ul>YesWEEEYesNoNo1"/8/0/80791939.jpgYesYesLifetimePP-LC-625MM-6PAK123.570000Use configBlock after Info Column6No layout updates123.570000Price RangeBeigePre-Polished Fiber Optic Connector - OM1, Multimode, LC, Beige, 6-PackNetwork ConnectorTogetherETS3539666/8/0/80791939.jpgEnabledNo/8/0/80791939.jpgNoYesTaxable Goods/8/0/80791939.jpg2023-04-30 03:19:14YesCatalog, Search00.2200003.49 ozYes8.3"
