This Pre-Polished Fiber Optic Connector can save technicans a ton of time in the field. These connectors are so easy to install, you can do it in a minute! There's no hand polishing. No epoxy!
Proven mechanical splice technology ensures precise fiber alignment. A factory pre-cleaved, factory-polished ferrule couples to the fiber being terminated with precise mechanical alignment. A proprietary index-matching gel ensures a low loss termination to 50-micron OM3 multimode optical fibers. There are no expensive tools, no messy epoxy needed.
A factory-installed wedge clip holds the clamping device open while the fiber is inserted. This clip also enables the use of a Visible Fault Identifier (VFI) to provide a "pass/fail" signal once physical contact is achieved. The connector is compatible with 250-µm and 900-µm optical fibers.
This connector is also available in ST and SC versions and for 50-micron and 62.5-micron multimode, as well as single-mode fiber. Connectors for each fiber type are color coded to industry standard requirements to help with identification during and after installation.
https://www.trivoshop.com/black-box-om3-50-micron-multimode-pre-polished-fiber-connector-lc-aqua-6-pack-ets3667588200903Black Box OM3 50-Micron Multimode Pre-Polished Fiber Connector - LC, Aqua, 6-Packhttps://www.trivoshop.com/media/catalog/product/8/0/80867749.jpg112.87112.87USDInStock/Hardware Connectivity/Hardware Connectivity/Connectors/Top Categories/Computers, Laptops & Accessories483037716This Pre-Polished Fiber Optic Connector can save technicans a ton of time in the field. These connectors are so easy to install, you can do it in a minute! There's no hand polishing. No epoxy!<br /><br />Proven mechanical splice technology ensures precise fiber alignment. A factory pre-cleaved, factory-polished ferrule couples to the fiber being terminated with precise mechanical alignment. A proprietary index-matching gel ensures a low loss termination to 50-micron OM3 multimode optical fibers. There are no expensive tools, no messy epoxy needed.<br /><br />A factory-installed wedge clip holds the clamping device open while the fiber is inserted. This clip also enables the use of a Visible Fault Identifier (VFI) to provide a "pass/fail" signal once physical contact is achieved. The connector is compatible with 250-µm and 900-µm optical fibers.<br /><br />This connector is also available in ST and SC versions and for 50-micron and 62.5-micron multimode, as well as single-mode fiber. Connectors for each fiber type are color coded to industry standard requirements to help with identification during and after installation.<br><ul><li>Guaranteed for life!</li><li>Meets TIA/EIA 568A performance requirements and TIA/EIA 604 (focis) connector interface specifications.</li><li>Factory polishing eliminates loss concerns.</li><li>Easy assembly with no need for epoxy.</li><li>Fiber can be reseated.</li><li>Optical multimode 3 (OM3) compliant for 10-Gigabit Ethernet support.</li><li>Pre-polished ferrules for fast connections in the field.</li></ul>00add-to-cartsku:ETS3667588description:This Pre-Polished Fiber Optic Connector can save technicans a ton of time in the field. These connectors are so easy to install, you can do it in a minute! There's no hand polishing. No epoxy!<br /><br />Proven mechanical splice technology ensures precise fiber alignment. A factory pre-cleaved, factory-polished ferrule couples to the fiber being terminated with precise mechanical alignment. A proprietary index-matching gel ensures a low loss termination to 50-micron OM3 multimode optical fibers. There are no expensive tools, no messy epoxy needed.<br /><br />A factory-installed wedge clip holds the clamping device open while the fiber is inserted. This clip also enables the use of a Visible Fault Identifier (VFI) to provide a "pass/fail" signal once physical contact is achieved. The connector is compatible with 250-µm and 900-µm optical fibers.<br /><br />This connector is also available in ST and SC versions and for 50-micron and 62.5-micron multimode, as well as single-mode fiber. Connectors for each fiber type are color coded to industry standard requirements to help with identification during and after installation.<br><ul><li>Guaranteed for life!</li><li>Meets TIA/EIA 568A performance requirements and TIA/EIA 604 (focis) connector interface specifications.</li><li>Factory polishing eliminates loss concerns.</li><li>Easy assembly with no need for epoxy.</li><li>Fiber can be reseated.</li><li>Optical multimode 3 (OM3) compliant for 10-Gigabit Ethernet support.</li><li>Pre-polished ferrules for fast connections in the field.</li></ul>price:112.870000weight:0.210000image:/8/0/80867749.jpgsmall_image:/8/0/80867749.jpgthumbnail:/8/0/80867749.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2022-09-29 01:41:41updated_at:2022-09-29 01:41:41country_of_manufacture: custom_layout:No layout updatesmsrp:144.180000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/8/0/80867749.jpgtax_class_id:Taxable Goodsproduct_name:OM3 50-Micron Multimode Pre-Polished Fiber Connector - LC, Aqua, 6-Packproduct_type:Network Connectormanufacturer_part_number:PP-LC-50MM-10G-6PAKcountry_of_origin:Mexicolimited_warranty:Lifetimebrand_name:Black Boxenvironmental_certification:WEEEenvironmentally_friendly:Yesproduct_color:Aquapackaged_quantity:6taa_compliant:Yeswesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Nosw_featured:Nosku:ETS3667588description:This Pre-Polished Fiber Optic Connector can save technicans a ton of time in the field. These connectors are so easy to install, you can do it in a minute! There's no hand polishing. No epoxy!<br /><br />Proven mechanical splice technology ensures precise fiber alignment. A factory pre-cleaved, factory-polished ferrule couples to the fiber being terminated with precise mechanical alignment. A proprietary index-matching gel ensures a low loss termination to 50-micron OM3 multimode optical fibers. There are no expensive tools, no messy epoxy needed.<br /><br />A factory-installed wedge clip holds the clamping device open while the fiber is inserted. This clip also enables the use of a Visible Fault Identifier (VFI) to provide a "pass/fail" signal once physical contact is achieved. The connector is compatible with 250-µm and 900-µm optical fibers.<br /><br />This connector is also available in ST and SC versions and for 50-micron and 62.5-micron multimode, as well as single-mode fiber. Connectors for each fiber type are color coded to industry standard requirements to help with identification during and after installation.<br><ul><li>Guaranteed for life!</li><li>Meets TIA/EIA 568A performance requirements and TIA/EIA 604 (focis) connector interface specifications.</li><li>Factory polishing eliminates loss concerns.</li><li>Easy assembly with no need for epoxy.</li><li>Fiber can be reseated.</li><li>Optical multimode 3 (OM3) compliant for 10-Gigabit Ethernet support.</li><li>Pre-polished ferrules for fast connections in the field.</li></ul>price:112.870000weight:0.210000image:/8/0/80867749.jpgsmall_image:/8/0/80867749.jpgthumbnail:/8/0/80867749.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2022-09-29 01:41:41updated_at:2022-09-29 01:41:41country_of_manufacture: custom_layout:No layout updatesmsrp:144.180000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/8/0/80867749.jpgtax_class_id:Taxable Goodsproduct_name:OM3 50-Micron Multimode Pre-Polished Fiber Connector - LC, Aqua, 6-Packproduct_type:Network Connectormanufacturer_part_number:PP-LC-50MM-10G-6PAKcountry_of_origin:Mexicolimited_warranty:Lifetimebrand_name:Black Boxenvironmental_certification:WEEEenvironmentally_friendly:Yesproduct_color:Aquapackaged_quantity:6taa_compliant:Yeswesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Nosw_featured:Nosku:ETS3667588description:This Pre-Polished Fiber Optic Connector can save technicans a ton of time in the field. These connectors are so easy to install, you can do it in a minute! There's no hand polishing. No epoxy!<br /><br />Proven mechanical splice technology ensures precise fiber alignment. A factory pre-cleaved, factory-polished ferrule couples to the fiber being terminated with precise mechanical alignment. A proprietary index-matching gel ensures a low loss termination to 50-micron OM3 multimode optical fibers. There are no expensive tools, no messy epoxy needed.<br /><br />A factory-installed wedge clip holds the clamping device open while the fiber is inserted. This clip also enables the use of a Visible Fault Identifier (VFI) to provide a "pass/fail" signal once physical contact is achieved. The connector is compatible with 250-µm and 900-µm optical fibers.<br /><br />This connector is also available in ST and SC versions and for 50-micron and 62.5-micron multimode, as well as single-mode fiber. Connectors for each fiber type are color coded to industry standard requirements to help with identification during and after installation.<br><ul><li>Guaranteed for life!</li><li>Meets TIA/EIA 568A performance requirements and TIA/EIA 604 (focis) connector interface specifications.</li><li>Factory polishing eliminates loss concerns.</li><li>Easy assembly with no need for epoxy.</li><li>Fiber can be reseated.</li><li>Optical multimode 3 (OM3) compliant for 10-Gigabit Ethernet support.</li><li>Pre-polished ferrules for fast connections in the field.</li></ul>price:112.870000weight:0.210000image:/8/0/80867749.jpgsmall_image:/8/0/80867749.jpgthumbnail:/8/0/80867749.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2022-09-29 01:41:41updated_at:2022-09-29 01:41:41country_of_manufacture: custom_layout:No layout updatesmsrp:144.180000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/8/0/80867749.jpgtax_class_id:Taxable Goodsproduct_name:OM3 50-Micron Multimode Pre-Polished Fiber Connector - LC, Aqua, 6-Packproduct_type:Network Connectormanufacturer_part_number:PP-LC-50MM-10G-6PAKcountry_of_origin:Mexicolimited_warranty:Lifetimebrand_name:Black Boxenvironmental_certification:WEEEenvironmentally_friendly:Yesproduct_color:Aquapackaged_quantity:6taa_compliant:Yeswesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Nosw_featured:NoBlack BoxMexico2022-09-29 01:41:41-- Please Select --No layout updatesThis Pre-Polished Fiber Optic Connector can save technicans a ton of time in the field. These connectors are so easy to install, you can do it in a minute! There's no hand polishing. No epoxy!<br /><br />Proven mechanical splice technology ensures precise fiber alignment. A factory pre-cleaved, factory-polished ferrule couples to the fiber being terminated with precise mechanical alignment. A proprietary index-matching gel ensures a low loss termination to 50-micron OM3 multimode optical fibers. There are no expensive tools, no messy epoxy needed.<br /><br />A factory-installed wedge clip holds the clamping device open while the fiber is inserted. This clip also enables the use of a Visible Fault Identifier (VFI) to provide a "pass/fail" signal once physical contact is achieved. The connector is compatible with 250-µm and 900-µm optical fibers.<br /><br />This connector is also available in ST and SC versions and for 50-micron and 62.5-micron multimode, as well as single-mode fiber. Connectors for each fiber type are color coded to industry standard requirements to help with identification during and after installation.<br><ul><li>Guaranteed for life!</li><li>Meets TIA/EIA 568A performance requirements and TIA/EIA 604 (focis) connector interface specifications.</li><li>Factory polishing eliminates loss concerns.</li><li>Easy assembly with no need for epoxy.</li><li>Fiber can be reseated.</li><li>Optical multimode 3 (OM3) compliant for 10-Gigabit Ethernet support.</li><li>Pre-polished ferrules for fast connections in the field.</li></ul>YesWEEENoNoNo/8/0/80867749.jpgYesYesLifetimePP-LC-50MM-10G-6PAK144.180000Use configBlock after Info Column6No layout updates112.870000Price RangeAquaOM3 50-Micron Multimode Pre-Polished Fiber Connector - LC, Aqua, 6-PackNetwork ConnectorTogetherETS3667588/8/0/80867749.jpgEnabledNo/8/0/80867749.jpgNoYesTaxable Goods/8/0/80867749.jpg2022-09-29 01:41:41YesCatalog, Search0.210000Yes
