Split Your PoE Signal into Separate Power and Ethernet Connections for Edge Networks Connect the NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter to your edge network up to 328 feet (100 meters) from a PoE switch or 48V injector. The splitter separates the power and data signals, delivering 5V 1A (5W) of power to the USB Micro-B plug and 10/100/1000 Mbps to the RJ45 data plug. This allows you more flexibility in placing devices in areas where an AC outlet is unavailable and too expensive or impractical to install.
Supports Power over Ethernet to Save You Money and Give You More Installation Choices This PoE splitter supplies the power (through its USB connector) to operate non-PoE equipment, such as security cameras, VoIP telephones and wireless access points (WAP). This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install devices in areas far away from AC outlets, such as poles or ceilings. The NPOE-SPL-G-5VMU supports a wide range of input voltages from 36VDC to 57VDC and has a fixed USB output of 5VDC.
Simple Plug-and-Play Installation Has the Splitter Connected in Minutes No configuration or software is required to add the NPOE-SPL-G-5VMU to your LAN. It complies with 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.
Typical Applications
Install an Alexa-enabled device or VoIP phone in an area without a standard power connection
Fill in Wi-Fi dead spots in your office with a wireless access point connected to your LAN
Set up digital signage in a mall, arena, office building or theater
Connect security cameras and other A/V surveillance equipment in a video wall
System Requirements
IEEE 802.3af/at-compliant PoE injector or switch
Existing or newly installed Cat5e/6/6a cabling
A network device with a 5V 1a USB Micro-B power port
3-year limited warranty
Quick and easy plug-and-play installation with no configuration necessary
Designed for PoE devices like Wireless Access Points and security cameras
Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps (1 Gbps)
Delivers power and data via Cat5e/6 cable up to 328 ft. to edge network equipment
Extends 5VDC power to any network device installed where no AC outlet is available
https://www.trivoshop.com/catalog/product/view/id/469265/s/tripp-lite-poe-to-usb-micro-b-and-rj45-active-splitter-48v-to-5v-1a-100m-ets5645180/469265Tripp Lite PoE to USB Micro-B and RJ45 Active Splitter 48V to 5V 1A 100Mhttps://www.trivoshop.com/media/catalog/product/1/6/164230526.jpg15.0915.09USDInStock/Accessories/Accessories/Signal Splitters/Amplifiers12203<p><b>Features</b></p> <p><b>Split Your PoE Signal into Separate Power and Ethernet Connections for Edge Networks</b><br />Connect the NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter to your edge network up to 328 feet (100 meters) from a PoE switch or 48V injector. The splitter separates the power and data signals, delivering 5V 1A (5W) of power to the USB Micro-B plug and 10/100/1000 Mbps to the RJ45 data plug. This allows you more flexibility in placing devices in areas where an AC outlet is unavailable and too expensive or impractical to install.</p> <p><b>Supports Power over Ethernet to Save You Money and Give You More Installation Choices</b><br />This PoE splitter supplies the power (through its USB connector) to operate non-PoE equipment, such as security cameras, VoIP telephones and wireless access points (WAP). This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install devices in areas far away from AC outlets, such as poles or ceilings. The NPOE-SPL-G-5VMU supports a wide range of input voltages from 36VDC to 57VDC and has a fixed USB output of 5VDC.</p> <p><b>Simple Plug-and-Play Installation Has the Splitter Connected in Minutes</b><br />No configuration or software is required to add the NPOE-SPL-G-5VMU to your LAN. It complies with 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.</p> <p><b>Typical Applications</b></p> <ul> <li>Install an Alexa-enabled device or VoIP phone in an area without a standard power connection</li> <li>Fill in Wi-Fi dead spots in your office with a wireless access point connected to your LAN</li> <li>Set up digital signage in a mall, arena, office building or theater</li> <li>Connect security cameras and other A/V surveillance equipment in a video wall</li> </ul> <p><b>System Requirements</b></p> <ul> <li>IEEE 802.3af/at-compliant PoE injector or switch</li> <li>Existing or newly installed Cat5e/6/6a cabling</li> <li>A network device with a 5V 1a USB Micro-B power port</li> </ul><br><ul><li>3-year limited warranty</li><li>Quick and easy plug-and-play installation with no configuration necessary</li><li>Designed for PoE devices like Wireless Access Points and security cameras</li><li>Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps (1 Gbps)</li><li>Delivers power and data via Cat5e/6 cable up to 328 ft. to edge network equipment</li><li>Extends 5VDC power to any network device installed where no AC outlet is available</li></ul>Tripp Lite by Eaton00add-to-cartsku:ETS5645180description:<p><b>Features</b></p> <p><b>Split Your PoE Signal into Separate Power and Ethernet Connections for Edge Networks</b><br />Connect the NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter to your edge network up to 328 feet (100 meters) from a PoE switch or 48V injector. The splitter separates the power and data signals, delivering 5V 1A (5W) of power to the USB Micro-B plug and 10/100/1000 Mbps to the RJ45 data plug. This allows you more flexibility in placing devices in areas where an AC outlet is unavailable and too expensive or impractical to install.</p> <p><b>Supports Power over Ethernet to Save You Money and Give You More Installation Choices</b><br />This PoE splitter supplies the power (through its USB connector) to operate non-PoE equipment, such as security cameras, VoIP telephones and wireless access points (WAP). This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install devices in areas far away from AC outlets, such as poles or ceilings. The NPOE-SPL-G-5VMU supports a wide range of input voltages from 36VDC to 57VDC and has a fixed USB output of 5VDC.</p> <p><b>Simple Plug-and-Play Installation Has the Splitter Connected in Minutes</b><br />No configuration or software is required to add the NPOE-SPL-G-5VMU to your LAN. It complies with 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.</p> <p><b>Typical Applications</b></p> <ul> <li>Install an Alexa-enabled device or VoIP phone in an area without a standard power connection</li> <li>Fill in Wi-Fi dead spots in your office with a wireless access point connected to your LAN</li> <li>Set up digital signage in a mall, arena, office building or theater</li> <li>Connect security cameras and other A/V surveillance equipment in a video wall</li> </ul> <p><b>System Requirements</b></p> <ul> <li>IEEE 802.3af/at-compliant PoE injector or switch</li> <li>Existing or newly installed Cat5e/6/6a cabling</li> <li>A network device with a 5V 1a USB Micro-B power port</li> </ul><br><ul><li>3-year limited warranty</li><li>Quick and easy plug-and-play installation with no configuration necessary</li><li>Designed for PoE devices like Wireless Access Points and security cameras</li><li>Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps (1 Gbps)</li><li>Delivers power and data via Cat5e/6 cable up to 328 ft. to edge network equipment</li><li>Extends 5VDC power to any network device installed where no AC outlet is available</li></ul>price:15.090000weight:0.200000manufacturer:Tripp Lite by Eatonimage:/1/6/164230526.jpgsmall_image:/1/6/164230526.jpgthumbnail:/1/6/164230526.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2023-09-27 11:52:16updated_at:2024-03-11 09:31:43country_of_manufacture: custom_layout:No layout updatesmsrp:24.160000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/1/6/164230526.jpgtax_class_id:Taxable Goodsproduct_name:NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitterwidth:3.2"product_type:Signal Splitterheight:0.9"manufacturer_part_number:NPOE-SPL-G-5VMUcountry_of_origin:Chinalimited_warranty:3 Yearbrand_name:Tripp Liteproduct_model:NPOE-SPL-G-5VMUpackage_contents:NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter, Quick Start Guideweight_approximate:1.76 ozdepth:1.1"environmental_certification:RoHS,REACHenvironmentally_friendly:Yeswesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nowebsite_id:0sku:ETS5645180description:<p><b>Features</b></p> <p><b>Split Your PoE Signal into Separate Power and Ethernet Connections for Edge Networks</b><br />Connect the NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter to your edge network up to 328 feet (100 meters) from a PoE switch or 48V injector. The splitter separates the power and data signals, delivering 5V 1A (5W) of power to the USB Micro-B plug and 10/100/1000 Mbps to the RJ45 data plug. This allows you more flexibility in placing devices in areas where an AC outlet is unavailable and too expensive or impractical to install.</p> <p><b>Supports Power over Ethernet to Save You Money and Give You More Installation Choices</b><br />This PoE splitter supplies the power (through its USB connector) to operate non-PoE equipment, such as security cameras, VoIP telephones and wireless access points (WAP). This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install devices in areas far away from AC outlets, such as poles or ceilings. The NPOE-SPL-G-5VMU supports a wide range of input voltages from 36VDC to 57VDC and has a fixed USB output of 5VDC.</p> <p><b>Simple Plug-and-Play Installation Has the Splitter Connected in Minutes</b><br />No configuration or software is required to add the NPOE-SPL-G-5VMU to your LAN. It complies with 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.</p> <p><b>Typical Applications</b></p> <ul> <li>Install an Alexa-enabled device or VoIP phone in an area without a standard power connection</li> <li>Fill in Wi-Fi dead spots in your office with a wireless access point connected to your LAN</li> <li>Set up digital signage in a mall, arena, office building or theater</li> <li>Connect security cameras and other A/V surveillance equipment in a video wall</li> </ul> <p><b>System Requirements</b></p> <ul> <li>IEEE 802.3af/at-compliant PoE injector or switch</li> <li>Existing or newly installed Cat5e/6/6a cabling</li> <li>A network device with a 5V 1a USB Micro-B power port</li> </ul><br><ul><li>3-year limited warranty</li><li>Quick and easy plug-and-play installation with no configuration necessary</li><li>Designed for PoE devices like Wireless Access Points and security cameras</li><li>Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps (1 Gbps)</li><li>Delivers power and data via Cat5e/6 cable up to 328 ft. to edge network equipment</li><li>Extends 5VDC power to any network device installed where no AC outlet is available</li></ul>price:15.090000weight:0.200000manufacturer:Tripp Lite by Eatonimage:/1/6/164230526.jpgsmall_image:/1/6/164230526.jpgthumbnail:/1/6/164230526.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2023-09-27 11:52:16updated_at:2024-03-11 09:31:43country_of_manufacture: custom_layout:No layout updatesmsrp:24.160000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/1/6/164230526.jpgtax_class_id:Taxable Goodsproduct_name:NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitterwidth:3.2"product_type:Signal Splitterheight:0.9"manufacturer_part_number:NPOE-SPL-G-5VMUcountry_of_origin:Chinalimited_warranty:3 Yearbrand_name:Tripp Liteproduct_model:NPOE-SPL-G-5VMUpackage_contents:NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter, Quick Start Guideweight_approximate:1.76 ozdepth:1.1"environmental_certification:RoHS,REACHenvironmentally_friendly:Yeswesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nowebsite_id:0sku:ETS5645180description:<p><b>Features</b></p> <p><b>Split Your PoE Signal into Separate Power and Ethernet Connections for Edge Networks</b><br />Connect the NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter to your edge network up to 328 feet (100 meters) from a PoE switch or 48V injector. The splitter separates the power and data signals, delivering 5V 1A (5W) of power to the USB Micro-B plug and 10/100/1000 Mbps to the RJ45 data plug. This allows you more flexibility in placing devices in areas where an AC outlet is unavailable and too expensive or impractical to install.</p> <p><b>Supports Power over Ethernet to Save You Money and Give You More Installation Choices</b><br />This PoE splitter supplies the power (through its USB connector) to operate non-PoE equipment, such as security cameras, VoIP telephones and wireless access points (WAP). This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install devices in areas far away from AC outlets, such as poles or ceilings. The NPOE-SPL-G-5VMU supports a wide range of input voltages from 36VDC to 57VDC and has a fixed USB output of 5VDC.</p> <p><b>Simple Plug-and-Play Installation Has the Splitter Connected in Minutes</b><br />No configuration or software is required to add the NPOE-SPL-G-5VMU to your LAN. It complies with 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.</p> <p><b>Typical Applications</b></p> <ul> <li>Install an Alexa-enabled device or VoIP phone in an area without a standard power connection</li> <li>Fill in Wi-Fi dead spots in your office with a wireless access point connected to your LAN</li> <li>Set up digital signage in a mall, arena, office building or theater</li> <li>Connect security cameras and other A/V surveillance equipment in a video wall</li> </ul> <p><b>System Requirements</b></p> <ul> <li>IEEE 802.3af/at-compliant PoE injector or switch</li> <li>Existing or newly installed Cat5e/6/6a cabling</li> <li>A network device with a 5V 1a USB Micro-B power port</li> </ul><br><ul><li>3-year limited warranty</li><li>Quick and easy plug-and-play installation with no configuration necessary</li><li>Designed for PoE devices like Wireless Access Points and security cameras</li><li>Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps (1 Gbps)</li><li>Delivers power and data via Cat5e/6 cable up to 328 ft. to edge network equipment</li><li>Extends 5VDC power to any network device installed where no AC outlet is available</li></ul>price:15.090000weight:0.200000manufacturer:Tripp Lite by Eatonimage:/1/6/164230526.jpgsmall_image:/1/6/164230526.jpgthumbnail:/1/6/164230526.jpgstatus:Enabledvisibility:Catalog, Searchcustom_design:-- Please Select --page_layout:No layout updatesoptions_container:Block after Info Columncreated_at:2023-09-27 11:52:16updated_at:2024-03-11 09:31:43country_of_manufacture: custom_layout:No layout updatesmsrp:24.160000msrp_display_actual_price_type:Use configprice_view:Price Rangeshipment_type:Togethergift_message_available:Noswatch_image:/1/6/164230526.jpgtax_class_id:Taxable Goodsproduct_name:NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitterwidth:3.2"product_type:Signal Splitterheight:0.9"manufacturer_part_number:NPOE-SPL-G-5VMUcountry_of_origin:Chinalimited_warranty:3 Yearbrand_name:Tripp Liteproduct_model:NPOE-SPL-G-5VMUpackage_contents:NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter, Quick Start Guideweight_approximate:1.76 ozdepth:1.1"environmental_certification:RoHS,REACHenvironmentally_friendly:Yeswesupply_estimation_display:Yesin_html_sitemap:Yesuse_in_crosslinking:Yesin_xml_sitemap:Yesstripe_sub_enabled:Nogoogleshopping_exclude:Nofeatured:Yessw_featured:Nowebsite_id:0Tripp LiteChina2023-09-27 11:52:16-- Please Select --No layout updates1.1"<p><b>Features</b></p> <p><b>Split Your PoE Signal into Separate Power and Ethernet Connections for Edge Networks</b><br />Connect the NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter to your edge network up to 328 feet (100 meters) from a PoE switch or 48V injector. The splitter separates the power and data signals, delivering 5V 1A (5W) of power to the USB Micro-B plug and 10/100/1000 Mbps to the RJ45 data plug. This allows you more flexibility in placing devices in areas where an AC outlet is unavailable and too expensive or impractical to install.</p> <p><b>Supports Power over Ethernet to Save You Money and Give You More Installation Choices</b><br />This PoE splitter supplies the power (through its USB connector) to operate non-PoE equipment, such as security cameras, VoIP telephones and wireless access points (WAP). This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install devices in areas far away from AC outlets, such as poles or ceilings. The NPOE-SPL-G-5VMU supports a wide range of input voltages from 36VDC to 57VDC and has a fixed USB output of 5VDC.</p> <p><b>Simple Plug-and-Play Installation Has the Splitter Connected in Minutes</b><br />No configuration or software is required to add the NPOE-SPL-G-5VMU to your LAN. It complies with 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.</p> <p><b>Typical Applications</b></p> <ul> <li>Install an Alexa-enabled device or VoIP phone in an area without a standard power connection</li> <li>Fill in Wi-Fi dead spots in your office with a wireless access point connected to your LAN</li> <li>Set up digital signage in a mall, arena, office building or theater</li> <li>Connect security cameras and other A/V surveillance equipment in a video wall</li> </ul> <p><b>System Requirements</b></p> <ul> <li>IEEE 802.3af/at-compliant PoE injector or switch</li> <li>Existing or newly installed Cat5e/6/6a cabling</li> <li>A network device with a 5V 1a USB Micro-B power port</li> </ul><br><ul><li>3-year limited warranty</li><li>Quick and easy plug-and-play installation with no configuration necessary</li><li>Designed for PoE devices like Wireless Access Points and security cameras</li><li>Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps (1 Gbps)</li><li>Delivers power and data via Cat5e/6 cable up to 328 ft. to edge network equipment</li><li>Extends 5VDC power to any network device installed where no AC outlet is available</li></ul>YesRoHS,REACHYesNoNo0.9"/1/6/164230526.jpgYesYes3 YearTripp Lite by EatonNPOE-SPL-G-5VMU24.160000Use configBlock after Info ColumnNPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter, Quick Start GuideNo layout updates15.090000Price RangeNPOE-SPL-G-5VMUNPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active SplitterSignal SplitterTogetherETS5645180/1/6/164230526.jpgEnabledNo/1/6/164230526.jpgNoTaxable Goods/1/6/164230526.jpg2024-03-11 09:31:43YesCatalog, Search00.2000001.76 ozYes3.2"